Video transmitter GEPRC MATEN 5.8G 10W VTX PRO

The GEPRC MATEN 5.8G 10W VTX PRO is an ultra-high-power analog video transmitter engineered for specialized long-range FPV operations within the standard 5.8GHz spectrum. Delivering 4 adjustable power stages up to a 10000mW output ceiling, it guarantees exceptional signal propagation, dense obstacle penetration, and maximum link reliability. Housed inside a high-strength CNC-machined aluminum alloy casing paired with an integrated active micro turbo fan, its unique structural design maximizes thermal dissipation while providing professional-grade impact resistance. Outfitted with a wide 12V to 36V voltage tolerance and active temperature protection, this VTX features an expansive 104-channel matrix and supports the standardized IRC Tramp protocol for effortless parameter tuning.

Features

High-Output Power Scaling: Outfitted with 4 adjustable power steps capable of stepping from stealth PIT mode up to an extreme 10000mW (10W) maximum output, making it ideal for specialized deep-range aircraft tracking.

Active Turbo-Fan Cooling: Combines a full structural CNC aluminum heat dissipation shield with an active internal micro turbo fan to maximize airflow and prevent thermal locking during high-power deployments.

IRC Tramp Telemetry Interface: Seamlessly integrates with standard IRC Tramp protocol fields, allowing pilots to modify video channels, bands, and power steps directly through the Betaflight OSD.

Expansive Frequency Spectrum: Operates across a massive 104-channel matrix from 4884MHz to 6184MHz, supporting direct frequency input via the configurator to easily bypass ambient signal overcrowding and multi-pilot interference.

Dual Mounting Compatibility: Integrated heavy-duty baseplate natively accommodates both 20x20mm (M2) and 30.5x30.5mm (M3) mounting layout configurations.

Intelligent Over-Heat Safety: Built-in temperature control monitoring actively safeguards internal processing circuits by throttling RF output stages if thermal safety thresholds are crossed to prevent burning.

Single-Button Interface Logic: Features a simplified physical control button paired with 3 bright LED diagnostic indicators for instantaneous, tool-free field adjustments.

Dedicated Camera Power Rail: Features a clean, regulated 5V output line designed specifically to supply clean power to onboard camera modules or auxiliary cooling fans.

Specifications

Brand: GEPRC

Model Name: MATEN 5.8G 10W VTX PRO

RF Carrier Frequency: 5.8 GHz Spectrum Core (4884 MHz – 6184 MHz)

Available Channel Matrix: 104 Selectable Channels

RF Output Power Platform: PIT / 25 mW / 2.5 W / 5 W / 10 W (Adjustable)

Telemetry Integration Bus: IRC Tramp Protocol (Supports Direct Frequency Input)

Primary Operating Input Voltage: 12.0 V – 36.0 V DC (Supports direct 3S – 8S LiPo mainlines)

Peak Working Current Draw: 3.5 A Maximum

Regulated Auxiliary Output: 5 V at 600 mA Maximum

Antenna Interface Connector: Heavy-Duty Threaded SMA Female Termination

Hardware Data Interconnect Ports: PH2.0 2-Pin (Power) & GH1.25 5-Pin (Data/Control)

Mechanical Mounting Patterns: 20.0 mm × 20.0 mm (M2) / 30.5 mm × 30.5 mm (M3) Dual Layout

Physical Footprint Dimensions: 78.5 mm × 43.6 mm × 25.3 mm

Weight Parameter: 110.0 g (VTX Module only)

Notes

Before use install the antenna. Running a 10W VTX without an antenna will cause instant, catastrophic damage to the RF amplifier stage.

Fly with constant airflow and in a well-ventilated environment to prevent overheating. Install an additional cooling fan if operating in confined spaces.

The 5V output is designed strictly for powering the FPV camera or small auxiliary fans. Never connect the main power supply or battery mainline to this 5V output line, as it will destroy the VTX circuitry.

Package

1 x GEPRC MATEN 5.8G 10W VTX PRO Module

1 x PH1.25 2-Pin Dedicated Power Cable (150 mm)

1 x GH1.25 5-Pin Flight Controller Link Wiring Harness (150 mm)

6 x M25 Hex Structural Screws

6 x M35 Hex Structural Screws

1 x User Product Manual