BetaFPV Air65 II Brushless Whoop Quadcopter

Air65 II – is an ultralight 65mm whoop designed for maximum

performance in three flight styles: professional racing (Champion),

technical racing (Racing), and smooth freestyle (Freestyle).

The main feature of the series is the use of the new Matrix

5IN1 II flight controller with a 12A ESC and an innovative

3-point mounting system that increases the drone's durability by 80%.

Technical specifications of the versions:

Champion (Flagman for professionals)

Weight: 16.6g (the lightest in the lineup).

Motors: Champion 0702 (36000KV) with dual ball bearings.

Propellers: GF 1207 3-Blade.

Frame: Ultralight Air65 Champion (2.20g).

Feature: Direct motor soldering to the FC to reduce weight and

resistance; thrust-to-weight ratio of 6.3:1.

Flight time: Up to 4:40 min.

Racing (For technical tracks)

Weight: 17.7g.

Motors: Racing 0702 (30000KV) with brass bushings.

Propellers: GF 1207 3-Blade.

Frame: Reinforced Air65 II.

Feature: Motor connection via JST1.25 connectors for quick replacement.

Flight time: Up to 4:30 min.

Freestyle (For smooth flights)

Weight: 17.8g.

Motors: Freestyle 0702 (25000KV) with brass bushings.

Propellers: GF 1219S 3-Blade (provide more thrust at low RPM).

Frame: Reinforced Air65 II.

Feature: Optimized for cinematic flight and high torque.

Flight time: Up to 4:30 min.

Key components and technologies:

Matrix 1S 5IN1 II FC: Integrates FC, ESC (12A), OSD, ELRS 2.4G,

and VTX (400mW). It features a thickened 1.0mm PCB and a damping

system on 3 mounting points.

Air II Canopy: Made of an updated impact-resistant material with an

adjustable camera tilt angle from 15° to 45°.

C03 Camera: Lightweight and reliable micro camera for a precise FPV signal.

Power system: BT2.0 U-cable (pigtail) connector for minimal voltage drops.

Endurance test results:

According to R&D research and community feedback, removing one front

silicone damper pad (switching to 3 mounting points) allowed to:

Reduce the transmission of shock load to the board.

Achieve 0% FC failures after 20 direct full-speed wall crashes

(Air65 II Racing version test).

Decrease the overall electronics failure rate by 80%.

Package contents (depends on the selected version):

For Champion version:

1* Air65 II Champion Quadcopter (soldered motors)

4* Spare GF 1207 3-Blade Propellers

1* Screw set (M1.42, M1.45, M1.44)

1 Spare Air II Canopy

2* H0.8 Damping Balls

1* Type-C to SH1.0 Adapter and SH1.0-4Pin Cable

For Racing/Freestyle versions:

1* Air65 II Quadcopter (motors on connectors)

4* Spare Propellers (GF 1207 for Racing or GF 1219S for Freestyle)

1* Full set of mounting screws and spare Air II Canopy

1* Damping balls and adapters for computer configuration

Or

Full Kit:

1* Air65 II Quadcopter (motors on connectors)

4* Spare Propellers (GF 1207 for Racing or GF 1219S for Freestyle)

1* Full set of mounting screws and spare Air II Canopy

1* Damping balls and adapters for computer configuration

2* BETAFPV BT2.0 300mAh 1S batteries

1* BetaFPV BT2.0 Battery Charger and Voltage Tester V2