Radiomaster ER8G & ER8GV 2.4GHz ELRS PWM Receiver

The RadioMaster ER PWM series receivers are based on the revolutionary ExpressLRS system. They offer high performance, high reliability, flexible configuration, fast response speed and very long range, giving you a whole new experience in your hobby. The ER8G and ER8GV receivers are specifically designed for glider pilots requiring a compact and slim receiver. They can control up to 8 servos and have built-in receiver voltage telemetry and flight battery voltage telemetry with the ability to automatically determine which voltage input to use (only one voltage input can be used at a time). Both the ER8G and ER8GV receivers feature dual antennas with telemetry power up to 100mW and can be used with the receiver's 1S Lipo battery. The ER8G receiver has the same functionality as the ER8GV, but without the built-in CVT for competitions that prohibit the use of a CVT, or simply for users who do not need a CVT on their receiver.

Specifications (ER8G):

Item Name: ER8G 2.4GHz ELRS PWM Receiver

Power: DC 3.5 – 8.4V

Antenna type: 20cm high sensitivity antenna

Wireless Protocol: ExpressLRS 3.3.0 (pre-installed)

Output channels: 8CH PWM

Serial output: CRSF/Sbus

Telemetry power: maximum 100mw (can be configured via LUA)

Battery voltage detection range: DC 4.0 – 35V

Weight: 12 grams

Dimensions: 60*13.5*13mm

Firmware: Device category: Radiomaster 2.4Ghz / Device: RadioMaster ER8-G 2.4GHz Diversity+8xPWM RX

Specifications (ER8GV):

Item Name: ER8GV 2.4GHz ELRS PWM Receiver

Power: DC 3.5 – 8.4V

Antenna type: 20cm high sensitivity antenna

Wireless Protocol: ExpressLRS 3.2 (pre-installed)

Output channels: 8CH PWM

Serial output: CRSF/Sbus

Return power: maximum 100mw (can be configured via LUA)

Built-in high-precision air pressure sensor (variator): Yes

Battery voltage detection range: DC 4.0 – 35V

Weight: 12 grams

Dimensions: 60*13.5*13mm

Firmware: Device category: Radiomaster 2.4Ghz / Device: RadioMaster ER8-GV 2.4GHz Diversity+8xPWM RX+Vario RX

Equipment:

1 x ER8G or ER8GV 2.4GHz ELRS PWM Receiver (depending on the selected model)

2 x Heat cleaning tubes

1 x Voltage Telemetry Wire (Type-A)

1 x CRSF Wire

1 x ELRS-RX-SBUS wire

1 x User Card