Flywoo GOKU F722 Pro Mini V2 Stack 45A 32Bit 128K 20X20 Stack Plug&Play O4 / O4 Pro

The Flywoo GOKU F722 Pro Mini V2 45A Stack is a premium, compact power and control system engineered for tight builds, high-end cinewhoops, and aggressive 3-to-5-inch freestyle drones. Driven by a high-speed STM32F722 processor clocked at 216MHz, this mini stack delivers massive desktop-class computing capabilities within a highly optimized 20x20mm layout.

It pairs the flight controller with a high-frequency 45A continuous current 4-in-1 ESC that supports advanced 32-bit hardware architectures (BLHeli_32 / AM32) up to 128kHz PWM. Designed with premium immersion gold PCB layers to handle rapid thermal dissipation, the flight controller features dual ESC connectors allowing it to natively run up to 8 motor outputs—making it an ultimate micro platform for tight-clearance hexacopters and octacopters.

Features

Miniature High-Speed Processing: Equipped with an STM32F722 MCU running at 216MHz for lightning-fast loop times and optimal peripheral multitasking.

Micro Octacopter Expansion Ready: Features dual ESC harness connectors to support up to 8 motor outputs natively, an extraordinary option for heavy-lift cinematic mini platforms.

Premium PCB Engineering: Built with an immersion gold manufacturing finish to drop internal resistance and handle extreme heat dissipation during high-amp bursts.

Solderless Snap-Lock Layout: Includes plug-and-play wiring ports for painless, solderless integration with the DJI O3 Air Unit, GPS systems, and receivers.

Advanced Next-Gen ESC Core: Outfitted with a high-performance 4-in-1 ESC supporting both BLHeli_32 and AM32 firmware architectures with up to 128kHz PWM frequencies for ultimate throttle responsiveness.

GOKU F722 Pro Mini V2 Flight Controller Specifications

MCU: STM32F722 (216MHz core)

IMU: ICM42688 (SPI)

Barometer: DP310

Blackbox: 16MB onboard Flash Memory

OSD: Betaflight OSD with AT7456E chip

UART Ports: 6 hardware sets (UART1 - UART6)

BEC Output: 5V@2A and 10V@2A dual independent outputs

Input Voltage: 2–6S LiPo (7.4V – 26V)

Dimensions: 32×29×20 mm (Overall stack dimensions assembled)

Mounting Pattern: 20×20 mm (M2 holes)

Weight: 9.9 g

GOKU 45A 32Bit 128K 4-in-1 ESC Specifications

Model: GOKU 45A 32Bit 128K

Continuous Current: 45A

Burst Current: 50A (for up to 10 seconds)

Input Voltage: 2–6S LiPo

PWM Frequency Range: 24kHz – 128kHz

Protocols Supported: Dshot150 / Dshot300 / Dshot600 / Dshot1200

Firmware Architectures: BLHeli_32 / AM32 compatible

Mounting Pattern: 20×20 mm (M2 holes)

Weight: 9.9 g

Package Contents

1 x GOKU F722 Pro Mini V2 Flight Controller board

1 x GOKU 45A 32Bit 128K 4-in-1 ESC board

1 x Flight Controller-to-ESC interconnect harness

1 x DJI O3 Air Unit connection cable

1 x Analog VTX adapter cable

1 x FPV Camera connection cable

1 x GPS module connection cable

1 x Serial Radio Receiver cable

1 x External固定 Buzzer adapter cable

4 x M2 Silicone vibration-damping grommet balls

7 x M2 Rubber spacer O-rings