Flywoo Caddx Nebula Pro Nano Digital FPV Camera w/8cm cable

The Caddx Nebula Pro Nano is an ultra-lightweight, high-definition digital FPV flight camera explicitly engineered for the DJI Digital HD Air Unit and Caddx Vista ecosystem. Delivering a high-frame-rate video pipeline at 720p resolution at 120 frames per second via an oversampled 1080p sensor input, this nano-sized digital sensor provides crystal-clear visual telemetry with an ultra-low latency response rating down to 12ms. Housed within a heavily condensed 14mm form factor that weighs just 3.5 grams, the Nebula Pro Nano strikes an ideal balance between micro-airframe weight constraints and premium digital clarity, providing pilots with a high-definition tracking solution for compact indoor whoops and ultra-lightweight outdoor setups.

Features

DJI High-Definition Ecosystem Alignment: Custom-tailored for seamless hardware and software integration with Caddx Vista, RunCam Link, and legacy DJI Air Unit transmission modules.

Oversampled 120fps Digital Fluidity: Captures a high-rate 1080p sensor input and processes it into an ultra-smooth, oversampled 720p digital transmission stream, eliminating frame ghosting and stutter during aggressive high-speed maneuvering.

Dual-Tier Performance Modes: Features a low-latency flight tracking subroutine yielding a lightning-fast 12–28ms response window, alongside an optimized high-quality mode operating at 30–40ms for pristine cinematic capture.

High-Grade F/2.1 Panoramic Optics: Equipped with a premium 2.1mm lens featuring a wide f/2.1 aperture, providing an expansive 150-degree diagonal field of view (FOV) for exceptional peripheral awareness near obstacles.

Minimalist Ultra-Light Nano Profile: Shaves critical bulk down to a 16.5mm × 16mm × 14mm footprint weighing an astonishing 3.5 grams, allowing high-definition digital systems to be deployed on micro whoop and toothpick airframes.

Switchable Aspect Ratio Profiles: Features an internal menu engine that allows pilots to toggle between a native cinematic 16:9 widescreen view and a standard 4:3 racing format without pixel distortion.

Specifications

Brand: Caddx FPV

Model Name: Nebula Pro Nano HD Digital FPV Camera Matrix

Factory Identification Code: SZ05-K008B

Target Digital System Compatibility: DJI Air Unit / Caddx Vista / RunCam Link Ecosystems

Image Sensor Hardware: 1/3-Inch CMOS Digital Core (With 1080p/120fps Oversampling architecture)

Digital Video Resolution Target: 720p High-Definition @ 120 fps

Selectable Aspect Ratio Profiles: 16:9 Widescreen / 4:3 Standard Layout (Switchable)

Optical Lens Profile: 2.1 mm Focal Length / f/2.1 High-Aperture Optics

Optical Field of View (FOV): 150° Diagonal (D) / 122° Horizontal (H) / 93° Vertical (V)

Coaxial Data Interface Ribbon Length: 8 cm High-Shielding Coaxial Line

Physical Component Footprint: 16.5 mm × 16.0 mm × 14.0 mm (Nano Size Standard)

Physical Structural Net Mass: 3.5 g (Camera Unit Only)

Data Transmission Latency Matrix

Low-Latency Performance Mode: 12 ms – 28 ms Responsive Window

High-Quality Video Mode: 30 ms – 40 ms High-Fidelity Window

Operational Instructions

Mechanical Mounting Integration: Place the 14mm nano camera housing between the structural side plates of your drone frame canopy. Use the included hardware mounting kit to adjust the vertical tilt angle to match your forward flight velocity before final torque application.

Digital Coaxial Ribbon Interlocking: Guide the attached 8cm flexible coaxial ribbon cable into the MIPI camera socket of your Caddx Vista or DJI Air Unit video transmitter module. Gently lower the mechanical pressure locking bracket and secure the clamping screws down to ensure the ribbon pins do not shift loose during hard impacts.

Aspect Ratio System Calibration: Power up your DJI FPV Goggles and link a flight pack to the aircraft. Navigate into the goggle's internal on-screen display (OSD) settings menu, locate the camera calibration section, and toggle between 16:9 or 4:3 aspect profiles to complement your viewing preferences.

Pre-Flight Video Validation: Confirm that the high-definition 720p digital stream initializes instantly within your goggles. Verify that frame-rate processing smoothly tracks sharp lateral axis movements and check that the 8cm coaxial line is routed clear of active propeller paths.

Notes

Strict MIPI Interface Ribbon Safety: The fine 8cm coaxial ribbon cable transmits high-frequency digital data. Avoid crimping, twisting sharply, or routing the cable across sharp carbon fiber frame edges, as damaging the micro-shielding lines will cause immediate digital video blackouts, erratic data freezing, or permanent connection failure.

Pre-Flight Screw Torque Policy: When locking your camera frame screws into the nano mounting brackets, stop turning immediately once firm resistance is felt. Excessive torque will easily strip out the soft internal threads of the nano-sized casing, leading to high-frequency flight vibrations and severe image blurring during flight.

Vibration Isolation Guard: While the internal digital processing architecture is optimized for high-speed tracking, severe high-frequency drone resonance from bent propeller tips or damaged motors can introduce visual artifacts on screen. Ensure your drone motors run smooth and mount soft rubber dampening rings on the camera brackets if stabilization artifacts persist.

Package

1 x Caddx Nebula Pro Nano HD Digital FPV Flight Camera Module (with 8cm Coaxial Ribbon Cable)

1 x Custom Mechanical Structural Hardware Mounting Kit

1 x Technical User Operational Reference Manual