Flywoo Caddx Nebula Pro Digital FPV Camera w/12cm cable

The Caddx Nebula Pro is a premium, high-definition digital FPV flight camera explicitly engineered for the DJI Digital HD Air Unit and Caddx Vista ecosystem. Delivering a high-frame-rate video pipeline at 720p resolution at 120 frames per second, this digital sensor provides crystal-clear visual telemetry with an ultra-low latency response rating of under 28ms. Housed within a standardized 19mm micro-sized aluminum alloy shell, the Nebula Pro bridges the gap between raw cinematic clarity and fast reflex racing, providing pilots with a drop-in replacement module to maximize high-definition tracking efficiency across variable outdoor and indoor environments.

Features

DJI High-Definition Ecosystem Alignment: Custom-tailored for seamless hardware and software integration with Caddx Vista, RunCam Link, and legacy DJI Air Unit transmission modules.

High-Frame-Rate 120fps Digital Fluidity: Captures a continuous, low-latency 720p digital transmission stream, eliminating frame ghosting and stutter during aggressive high-speed maneuvering or low-altitude proximity runs.

Ultra-Low Latency Video Pipeline: Optimized image processing structures reduce total data transmission propagation lag down to a reliable sub-28ms baseline, matching fast pilot control inputs.

High-Grade F/2.1 Panoramic Optics: Equipped with a premium 2.1mm lens featuring a wide f/2.1 aperture, providing an expansive 150-degree field of view (FOV) for exceptional peripheral awareness near obstacles.

Standardized Micro Aluminum Chassis: Manufactured from lightweight, high-tensile aluminum alloy within a 19mm × 19mm footprint, providing robust impact armor and optimized thermal dissipation.

Switchable Aspect Ratio Profiles: Features an internal menu engine that allows pilots to toggle between a native cinematic 16:9 widescreen view and a standard 4:3 racing format without pixel distortion.

Specifications

Brand: Caddx FPV

Model Name: Nebula Pro HD Digital FPV Camera Matrix

Target Digital System Compatibility: DJI Air Unit / Caddx Vista / RunCam Link Ecosystems

Image Sensor Hardware: 1/3-Inch CMOS Digital Core

Digital Video Resolution Target: 720p High-Definition (1280 × 720 @ 120 fps)

Selectable Aspect Ratio Profiles: 16:9 Widescreen / 4:3 Standard Layout (Switchable)

Optical Lens Profile: 2.1 mm Focal Length / f/2.1 High-Aperture Optics

Horizontal Field of View (FOV): 150°

Data Telemetry Signal Latency: < 28 ms (High-Rate Performance Mode)

Shutter Mechanism Profile: Rolling Shutter Matrix

Coaxial Data Interface Ribbon Length: 12 cm High-Shielding Coaxial Line

Chassis Material Composition: Ruggedized Aluminum Alloy Shell

Physical Component Footprint: 19 mm × 19 mm × 20 mm (Micro Size Standard)

Physical Structural Net Mass: 6.0 g

Environmental Operating Boundaries: -20°C to +60°C (-4°F to 140°F)

Operational Instructions

Mechanical Mounting Integration: Place the 19mm camera housing between the structural side plates of your drone frame canopy. Secure the module using standard M2 hardware screws, adjusting the vertical tilt angle to match your cruising velocity before final torque application.

Digital Coaxial Ribbon Interlocking: Guide the attached 12cm flexible coaxial ribbon cable into the MIPI camera socket of your Caddx Vista or DJI Air Unit video transmitter module. Gently lower the mechanical pressure locking bracket and secure the clamping screws down to ensure the ribbon pins do not shift loose during hard impacts.

Aspect Ratio System Calibration: Power up your DJI FPV Goggles and link a flight pack to the aircraft. Navigate into the goggle's internal on-screen display (OSD) settings menu, locate the camera calibration section, and toggle between 16:9 or 4:3 aspect profiles to complement your viewing preferences.

Pre-Flight Video Validation: Confirm that the high-definition 720p digital stream initializes instantly within your goggles. Verify that frame-rate processing smoothly tracks sharp lateral axis movements and that the image stream is free from digital macroblocking or line static.

Notes

Strict MIPI Interface Ribbon Safety: The fine 12cm coaxial ribbon cable transmits high-frequency digital data. Avoid crimping, twisting sharply, or routing the cable across sharp carbon fiber frame edges, as damaging the micro-shielding lines will cause immediate digital video blackouts, erratic data freezing, or permanent connection failure.

Pre-Flight Screw Torque Policy: When locking your camera frame screws into the side mounting brackets, stop turning immediately once firm resistance is felt. Excessive torque will easily strip out the soft internal threads of the aluminum alloy casing, leading to high-frequency flight vibrations and severe image blurring during flight.

Vibration Isolation Guard: While the internal rolling shutter architecture is optimized for high-speed tracking, severe high-frequency drone resonance from bent propeller tips or damaged motors can introduce visual "jello" artifacts on screen. Ensure your drone motors run smooth and mount soft rubber dampening rings on the camera brackets if stabilization artifacts persist.

Package

1 x Caddx Nebula Pro HD Digital FPV Micro Flight Camera Module

1 x 12 cm Flexible High-Shielding Coaxial Data Interface Ribbon Cable