Motor iFlight XING2 3110 FPV Cinelifter Motor

Our XING NextGen motors have become the industry standard since their release in 2018. Was it the curved shape, the internal damping ring to protect the bearing, or the high quality NSK bearings combined with a titanium alloy shaft? We've been copied and compared all these years, but it's time to set a new standard again. We are excited to announce XING2 – the next evolution in motor technology!

XING2 motors are smoother, more reliable and more powerful than ever before. The center cuts on the N52H curved magnets significantly reduce motor response time, eliminating the biggest problem with FPV flight controllers - lag during braking and acceleration. With faster response, XING2 motors provide faster PID signal transmission, allowing you to achieve the "sticky" feeling you've always been looking for.

Thanks to premium materials and a secure connection between the housing and the shaft, we were able to reduce the air gap between the magnet and the stator lamination to a minimum. The smaller the air gap, the lower the resistance and the higher the magnetic flux, resulting in higher efficiency and more power.

Features

5mm Titanium Alloy Shaft – Our Durable Propeller Shaft!

Impact resistant 7075 aluminum housing

Smooth and durable NSK 11x5x5 bearings

Center cuts on N52H curved magnets

Bearing clearance protection with O-Ring XING

Motor Wire Protector – Provides durability.

Dynamic Balance – For smooth operation

Designed for 7/8/9 inch Cinelifter – Ideal for larger drones

Characteristics

KV: 900KV/1250KV/1600KV

Weight (including wire): 77g

Dimensions: φ38.72×24.6mm

Phase-to-phase resistance: 78 mΩ (900KV) / 43 mΩ (1250KV) / 36 mΩ (1600KV)

Supply voltage: 33.6V (900KV) / 4-6S (1250KV) / 25.2V (1600KV)

Maximum current: 65.54A(900KV)/84.68A(1250KV)/65.06A(1600KV)

Maximum power: 2143.8W (900KV)/1976.4W (1250KV)/1550.4W (1600KV)

Mounting holes: 19×19 φ3 mm

Rotor Specification: Unibell

Shaft diameter: 5mm

Protruding shaft length: 15 mm.

Wire length: 260mm/18AWG

Magnet: N52H curved

Configuration: 12N14P

Bearing type:NSK

Bearing specification: φ11×φ5×5

Winding: Single strand copper winding

Equipment

1 x XING2 3110 brushless motor

4 x M3×10 screw

1 x M5 flange nut

This new generation motor will transform your FPV flying experience. Get ready to feel the power!