Motor iFlight XING2 3106 Cinelifter Motor

Since its release in 2018, the XING NextGen series has set a new standard in the FPV industry. What made her so popular? Rounded shape, inner damper ring to protect the bearing, high quality NSK bearings or a titanium alloy shaft? We have been copied and compared all these years, but now it’s time to set a new level again!

The XING2 series retains all the advantages of the original XING motors and takes their performance to a new level. The new N52H center-slotted curved magnets significantly reduce motor response time. Since one of the main limitations of FPV is motor lag during braking and acceleration, XING2 provides faster response, allowing PID controller commands to be transmitted faster and achieve perfectly precise control.

Thanks to high quality materials and a reliable connection between the dome and shaft, we were able to minimize the gap between the magnets and the stator lamination. A smaller air gap means lower magnetic reluctance and higher magnetic permeability, which increases the efficiency and power of the motor.

Features

The 5mm titanium shaft is the strongest propeller shaft in our range.

The canopy is made from heavy-duty 7075 aluminum and can withstand even harsh impacts.

Smooth and durable NSK bearings 11x5x5 mm - for reliable operation.

N52H Center Slotted Curved Magnets – Faster Response and Greater Efficiency

XING O-ring bearing protection – reduces vibration and wear.

Protection of motor wires – extends service life

Dynamic balancing – for stable and smooth operation at high speeds

Characteristics

Model: XING2 3106

KV: 1200KV/1500KV

Weight (with wires): 58 g

Dimensions: Ø38.6×21 mm

Line-to-phase resistance: 64.5 mΩ (1200KV)/45.3 mΩ (1500KV)

Input voltage: 24V

Peak current: 63.01A (1200KV)/68.5A (1500KV)

Maximum power: 1512W (1200KV)/1644W (1500KV)

Mounting holes: 19×19mm (M3)

Rotor type: Unibell

Shaft diameter: 5mm

Protruding shaft length: 15 mm.

Wire length: 260mm/18AWG

Magnet type: N52H curved

Configuration: 12N14P

Bearing type: NSK

Bearing size: 11×5×5 mm

Winding: Single core copper

Equipment

1 × XING2 3106 brushless motor

4 × M3×8 screw

1 × M5 flange nut