iFlight 5.8GHz 25mW Race VTX Video Transmitter

The SucceX-RACE VTX is a specialized, race-optimized analog video transmitter designed with an integrated LED control core for intuitive aircraft status tracking and simplified field deployment. Engineered specifically for competitive racing environments, this module combines a fixed-power video link with an onboard programmable LED driver that dynamically alters the color of attached LED strips based on your active video frequency. Built with a dual-layer mechanical layout, it natively accommodates both 20×20mm and 30.5×30.5mm mounting patterns. Utilizing high-density plug-and-play wiring connectors, the SucceX-RACE completely eliminates the need for delicate point-to-point wire soldering, providing a clean and highly serviceable electronics stack layout.

Features

Integrated LED Core Infrastructure: Combines a dedicated 5V 2A LED lighting controller and a video transmitter onto a single hardware platform, streamlining racing frame telemetry setups.

Dynamic Color Frequency Sync: Connected external addressable LED strips automatically mirror the color profile of the selected video channel for instantaneous operational status verification.

Plug-and-Play Wire Architecture: Uses standardized, heavy-duty micro-plugs to allow quick structural swaps and bench maintenance without requiring any precision soldering.

Fixed Power Race Configuration: Locked to a standard 25mW output ceiling to ensure total compliance with competitive racing guidelines and prevent multi-pilot signal blasting in pits.

Dual-Pattern Mounting Chassis: Highly versatile mounting layout configuration natively supports both micro 20×20mm and standard 30.5×30.5mm stack alignments.

Dedicated Hardware Frequency Gate: Features a localized hardware frequency toggle button paired with a dedicated telemetry override loop for automated pitch-side control adjustments.

Specifications

Model Name: SucceX-RACE VTX

RF Carrier Frequency: 5.8 GHz Spectrum Core

RF Output Power States: 25 mW Fixed Output / Selectable Stealth PIT Mode

Primary Operating Input Voltage: 7.0 V – 26.0 V DC (Direct 2S – 6S LiPo Battery input)

Dedicated LED Power Output: 5 V Regulated at 2 A Maximum Headroom

Antenna Interface Connector: Low-Loss MMCX Mechanical Base

VTX Power/Data Interconnect Port: SH0.8 4-Pin Interface

LED Output Interconnect Port: SH0.8 3-Pin Interface

Mechanical Mounting Patterns: 20.0 mm × 20.0 mm / 30.5 mm × 30.5 mm Dual Compatibility

System Interface Configuration: Physical Tactile Button / Flight Controller OSD Override Capable

Operational Control Logic

Frequency Band Shifting: Short-press the physical CH button to cycle through internal channel profiles. The attached LED strip array will dynamically change color profiles to verify the change.

Stealth PIT Mode Control: Press and hold the CH button for 3 seconds to drop into stealth low-power PIT mode. Press and hold for an additional 3 seconds to restore active transmission.

OSD Configuration Override: When a flight controller telemetry link is actively managing the VTX over serial protocols, the local physical CH button is automatically locked out. To restore manual button control, disable the peripheral protocol inside your configurator or physically isolate the VTX RX telemetry wire line.

Package

1 x SucceX-RACE VTX Integrated Module