Video transmitter iFlight BLITZ Force 5.8GHz 600mW Adjustable VTX

The BLITZ Force 5.8GHz 600mW is a compact and efficient analog video transmitter engineered for tight multirotor builds and competitive FPV platforms. Delivering 4 adjustable power stages up to a stable 600mW output ceiling, it ensures reliable signal propagation and consistent video clarity across short to medium-range flight boundaries. Built with a minimalist micro-footprint layout, it integrates seamlessly into 20x20mm electronics stacks without adding significant weight. Outfitted with a wide 7V to 26V voltage tolerance, it natively supports Betaflight VTX table configurations via the standardized IRC Tramp telemetry protocol for effortless remote parameter tuning.

Features

Adjustable Power Platform: Features 4 selectable output stages supporting 25mW, 200mW, 400mW, and a high-penetration 600mW maximum setting for versatile environment adaptations.

IRC Tramp Telemetry Interface: Seamlessly integrates with standard IRC Tramp protocol fields, allowing pilots to modify video channels, bands, and power steps directly through the Betaflight OSD.

Expansive Frequency Spectrum: Operates across a comprehensive 40-channel matrix spread evenly over 5 frequency bands, fully incorporating a highly stable Raceband corridor to minimize inter-pilot signal washing.

Micro Form Factor Scaling: Minimalist, space-saving design weighing only ~6 grams, making it an ideal choice for micro long-range, tight freestyle, and weight-sensitive racing frames.

Broad Voltage Compatibility Matrix: Supports a wide input voltage corridor from 7V to 26V DC, enabling hassle-free direct power integration straight from 2S to 6S LiPo battery mainlines.

Specifications

Brand / Model: BLITZ Force 5.8GHz 600mW VTX

RF Carrier Frequency: 5.8 GHz Spectrum Core

Available Channel Matrix: 40 Selectable Channels (including Raceband)

RF Output Power Platform: 25 mW / 200 mW / 400 mW / 600 mW (Adjustable)

Telemetry Integration Bus: IRC Tramp Protocol (Betaflight VTX Table Compatible)

Primary Operating Input Voltage: 7.0 V – 26.0 V DC (Supports direct 2S – 6S LiPo mainlines)

Antenna Interface Connector: Low-Loss MMCX Mechanical Base

Mechanical Mounting Pattern: 20.0 mm × 20.0 mm Stack Alignment

Weight Parameter: ~6.0 g (excluding external antenna element)

Notes

Factory Default Power Step: For safety and regulatory compliance, the VTX is pre-configured out of the box to a standard 25mW output ceiling. High-power settings must be manually unlocked via the firmware configuration.

Before use install the antenna. Running a high-power VTX without an antenna will cause instant, catastrophic damage to the RF amplifier stage.

Fly with constant airflow and in a well-ventilated environment to prevent overheating. Operating transmission profiles above 25mW may require specific operator licensing or local regulatory approval depending on your region.

Package

1 x BLITZ Force 5.8GHz 600mW VTX Module

1 x Dedicated Hardware Wiring Harness Set