iFligh iXC13 X-CLASS Racing Frame Kit

More pilots are becoming interested in racing large drones as mini quadcopters reach their performance limits. X Class drones have huge potential for development. However, most components for large drones are designed for shooting, not the speed and responsiveness needed for racing.

That's why iFlight introduces the iXC13 850mm X CLASS, the company's first X CLASS frame, developed and tested over a six-month period. This is one of the most versatile and reliable frames created by the iFlight R&D team.

The smart mounting design is compatible with most motors on the market, making installation much easier and eliminating the need for additional adapters. Mounting the engine using two cross-mounts provides additional strength and stability of the structure.

Power-Lock System: Each arm is secured using two long M5 screws and M5 nuts, making the design extremely secure. In addition, two vertical side plates have been added to each arm to increase the rigidity of the joint. Thanks to this, the fastening is not only reliable, but also makes it easy to replace and repair frames.

To mount the antenna, a flexible 3D-printed support is provided, located on the rear of the housing, which facilitates its installation.

The frame design is based on simple but rigid 3mm top and bottom plates, which provide ample space to install the necessary equipment.

Features:

True X construction made from pure 3K carbon fiber

Sturdy GoPro mount and plenty of space for mounting electronics

Fully fixed shoulders for increased strength

Original motor mounting speeds up installation and ensures high strength

Power-Lock system for secure frame fastening

Specifications:

Model: iXC13 X Class Frame

Wheelbase: 850 mm

Shoulder carbon tube size: 20x20x375mm.

Pipe outer diameter: 20mm

Pipe inner diameter: 18mm

Case dimensions: 20 mm

Single pipe length: 375 mm.

Shoulder thickness: 6mm

Bottom plate thickness: 3mm.

Top plate thickness: 2 mm.

Top level thickness: 3mm

Camera mount thickness: 3 mm.

Motor mounting: 19×19 mm – 25×25 mm

VTX Mount: 30.5x30.5mm/20x20mm

Weight: 503.9 g (without TPU parts)

Equipment:

1× iFlight iXC13 850mm X CLASS Racing Frame

Note:

Due to the manufacturing process, material thicknesses may have a standard deviation of ±0.2 mm and hole sizes may have a standard deviation of ±0.1 mm.