iFligh Nazgul Evoque F5 V2 Frame Kit

Forget about the times when your electronics were completely covered in mud and wet grass after every collision. The Nazgul Evoque F5 V2's updated frame reduces contaminants that can accumulate on the flight controller or ESC, preventing breakdowns and short circuits. Strategically placed air cooling keeps components cool and clean without sacrificing weight or performance. Made with illuminated side panels and 360-degree TPU protection.

Features:

Upgrade from V1 to V2 for DJI O3 HD Air Unit Digital Transmission.

Specially designed heatsink for DJI O3 Air Unit.

New camera mount for a wider field of view with TPU shock-absorbing inserts.

New side panels for perfect compatibility with the O3 Air Unit on the back.

New mount for VTX 5.8G TPU antennas.

Updated Nazgul frame parts for maximum protection.

Optional parts (not included with frame):

New Anti Spark filter to prevent sudden surges in voltage and current when connecting a battery.

Single VTX antenna mount for mounting original DJI O3 antenna.

Upgrade Nazgul F5 V1 to F5 V2:

The FC to O3 VTX connector is different from the old Caddx Vista/Polar connection. DIY required.

The location for the receiver has changed. Antenna length V1 – 75 mm, V2 – 220 mm. DIY required.

You need to resolder the XT60 connector to change from V1 to V2 (included in the kit).

If you are upgrading from F5X V1 to F5X V2, all motor wires will be the same length.

If you are moving from F5X V1 to F5D V2, the wires for the rear motors will need to be lengthened due to the change in frame geometry.

The TPU antennas on the back of the frame are available in two options: for the original DJI VTX single antenna or for two antennas. The kit includes TPU for two antennas. You need to install 2 5.8G LHCP antennas.

Nazgul Evoque F5 V2 BNF already has a new Anti Spark filter installed. Can be purchased separately if needed.

Specifications:

Product Name: Evoque F5 V2 Frame Kit

Wheelbase: 225 mm (Squashed X) / 223 mm (DeadCat)

Frame dimensions: L172W145H36 mm (Squashed X)/L190W136H36 mm (DeadCat)

Arm thickness: 6mm

Bottom plate thickness: 3 mm.

Top plate thickness: 2 mm.

Top plate thickness: 3 mm.

Chamber plate thickness: 3 mm.

Max. flight stack height: 22 mm

Max. VTX height: 23 mm

Motor mounting: 16x16mm

Flight stack mounting: 20*20/Φ3mm

VTX mounting: 25.5*25.5/Φ2mm

Weight: 240±5g (Squashed X) / 242±5g (DeadCat)

Equipment:

1 x Evoque F5 V2 Frame Kit

1 x O3 Air Unit Heatsink

2 x IPEX to RP-SMA Antenna Pigtails

1 x Dual Antenna TPU

1 x GoPro TPU Base Mount

1 x Screw Bag

4 x TPU Arm Guard

1 x Front Bumper TPU

1 x Rear Bumper TPU

2 x Anti-slip Battery Pad

2 x Battery Strap

Please note:

Depending on manufacturing processes, the thickness of our products may have a standard manufacturing tolerance of ±0.2mm. The hole size may have a standard manufacturing tolerance of ±0.1mm.