- Availability: Предзаказ
- Product Code: TaurusX8Pro
- Product overview
- Reviews (0)
iFlight Taurus X8 Pro O3 BNF is designed together with professionals for professionals, this drone is intended for carrying heavy loads, providing a universal platform with soft damping for installing DSLR and cinema cameras (Red Komodo, Zcam, BMPCC, etc), equipped with HD FPV-transmission DJI
8 separate X-Class ESCs ensure maximum reliability and power Reliability is a critical factor when transporting expensive film equipment Even in case of overload or failure of one of the ESCs or motors, the others will ensure a safe return
GPS-rescue function is activated in case of signal interference or loss of communication: the drone will rise to maximum altitude, return in a straight line to the takeoff spot and descend until the signal is restored (without automatic landing)
Integrated TPU landing gear provides stability on different surfaces and protection during hard landings
The drone withstands up to 2 kg of payload, supports top camera mounting with precise balancing for a perfect center of gravity (CG) The installed 8S battery acts not only as a power source, but also as a counterweight to common cinema camera models Quick installation is provided by iFlight Battery Quick-Release System
Adjustable CNC-aluminum camera mount supports angles from 5° to 35° and is fixed for precise angle reproduction
No vibrations or "jello" effect – thanks to silicone dampers isolating the carbon camera base from motors and propellers
For perfect cinematic shots, additional software stabilization in ReelSteady, Gyroflow or the use of hardware stabilizers (e.g. SteadXP) is recommended
Key Features
XING2 3314 motors – maximum thrust and performance
8S power – more power and speed
8 X-Class ESCs – increased reliability
Redundant iFlight ESC Commander PCB – distribution board with noise filtering and effective cooling
Pre-installed GPS module (BF GPS Rescue or INAV GPS RTH)
HD FPV-system DJI O3 – 4K video with ultra-wide 155° FOV
Protected battery connection with anti-spark filter
Universal camera mount with accessories
Changelog
June 12, 2023 – XING2 3110 900KV motors changed to black color
February 17, 2024 – XING2 3110 900KV motors replaced with XING2 3314 900KV
May 8, 2024 – Albatross antenna available in two variants, shipped randomly
Specifications
Model: Taurus X8 Pro O3
Flight Controller: BLITZ F7 Pro
ESC: BLITZ E80 (with CNC aluminum housing)
FPV-video transmission: DJI O3 Air Unit
Diagonal: 464±2mm
Motors: XING2 3314 900KV
Propellers: HQ 8×4×3
Weight: 2356±10g
Takeoff Weight: 3494±20g (with 8S 5000mAh battery)
Dimensions (L×W×H): 428×249×74mm
Max Speed: 150 km/h
Max Takeoff Altitude: 3200m
Hover Time: ≈5 min (with 8S 5000mAh and 1.5kg load)
Wind Resistance: Level 8
Operating Temperature: -10°…+40°C
Antennas: Dual antennas
GNSS: GPS+SBAS+Galileo+QZSS+Glonass
Video Transmission (DJI O3 Air Unit)
Weight: ≈36.4g (including mount)
Dimensions: 32.5×20.5×14.5mm
Communication Frequency: 2.4 GHz / 5.8 GHz
Maximum Bitrate: 50 Mbps
Video Transmission Range:
10 km (FCC)
2 km (CE)
6 km (SRRC)
Video Formats:
810p/120fps – <28 ms latency (DJI FPV Goggles V2)
810p/60fps – <40 ms latency (DJI FPV Goggles V2)
1080p/100fps – <30 ms latency (DJI Goggles 2)
1080p/60fps – <40 ms latency (DJI Goggles 2)
Operating Temperature: -10°…+40°C
Power: 7.4-26.4V
Package
1× Taurus X8 Pro O3 BNF (factory assembled and tested)
8× HQ 8X4X3 CW propellers + 8× HQ 8X4X3 CCW propellers (color random)
2× Albatross LHCP 5.8GHz SMA FPV antennas
1× XT90 Male → XT60 Female adapter
2× iFlight Lipo straps 20×400mm (black)
2× iFlight Lipo straps 20×500mm (black)
1× CNC-aluminum camera bracket
1× XT90 Smart Smoke Stopper
1× Propeller wrench