Frame GEPRC GEP-ZX5

Why should we design this frame? We often think how can I make a good performance, strong structure suitable for racing, as well as a very good full-length freestyle frame, we also have some references in the market for some good frame designs, we also try, constantly improve, constantly think. In the end we make us think that this is a great rack. The advantage of the rack will be presented in detail below.

GEP-ZX uses 3K carbon plate + aluminum alloy fastener. There are 3 types of wheelbase. GEP-ZX5: 190 mm, GEP-ZX4: 170 mm, GEP-ZX6: 225 mm. All frames adopt 90-degree square X structure. The advantage is that the aircraft can fly flexibly in any direction. The machine's bracket uses 4mm thick 3K carbon plate, only 14mm wide, to ensure minimal resistance. The thickness of 2mm is adopted on the top and top plate of the fuselage main board and the top plate, and the top plate is made with a thickness of 1.5mm. One aluminum alloy fastener with four machine brackets, a piece of aluminum alloy is fixed on the double strong and removable machine bracket, quick casual replacement, extremely durable. We finally decided to put the battery in the bottom of the fuselage, because the camera position design will be higher, if the battery is in the bottom of the body, the balance performance will be better. Camera position we use the fixed part very wisely, the angle can be adjusted, the maximum angle is 60 degrees, so it is very compatible with Runcam or GoPro camera.

Specifications

Name: GEP-ZX5

Weight: 100g (including aluminum parts)

Wheelbase: 190 mm 5''

Size: 160*175 mm

Hand board: 4mm

Main board: 2mm

Other board: 1.5mm

Recommended

Flight controller: F3/Naze32/CC3D

Engines: 2204/2205/2206/2305

ESC: 20A-30A

Propeller: 5 inches

Battery: 3S 1300mAh ~ 4S 1300mAh

Features:

High strength 3K carbon board to ensure frame strength.

Thanks to one piece of aluminum, the hand is stronger. Quick hand change

5" wheelbase is only 190mm, very small

This is an X layout, 90 degrees between each hand. Each direction is very flexible

There is very little wind resistance, but stay strong

You can choose forward direction

The design is strong, beautiful and lightweight (100g including all fixed parts).

Engine position extended, better engine protection

The camera angle is adjustable, adjustable by 60 degrees

The lens comes with fixed film, for the 95% CCD fixed lens market