Frame GEPRC GEP-CB4

The GEPRC GEP-CB4 Frame is a lightweight yet strong frame designed for FPV drones that combines high maneuverability and stability. Constructed from high-quality carbon fiber, it can withstand aggressive maneuvers and impacts while providing durability and reliability. The frame design is optimized to effectively reduce aerodynamic drag, allowing you to achieve high speeds with minimal energy loss.

The GEPRC GEP-CB4 is suitable for a wide range of applications, from freestyle to video shooting, where accuracy and stability are important. Its compact and lightweight design makes it ideal for pilots who want to build a drone with good performance and low weight. This frame allows you to customize the drone to suit your individual needs while maintaining high performance and efficiency in flight.

Specifications:

Brand: GEPRC

Name: GEP-CB4

Engine to engine: 174mm

Camera Position Size: 20mm

Props Size: 4 inches

Arm plate thickness: 2.5mm.

Bottom plate thickness: 2 mm.

Top plate thickness: 1.5 mm.

Flight Control Hole Distance: 20x20mm and 26.5x26.5mm

Motor hole position: 9mm

Weight: 45 g

Recommended: Recommended

Flight controller: F4/F7

Engines: 1206/1404

ESC: 15A-30A

Feature:

Full 3K carbon plates, strong and durable construction.

Specially designed for micro-long range flight, the frame tilts forward, the battery position is wide.

Mounting the camera using 3D printing structure, it can absorb most of the vibration and reduce jelly.

Support different way to set the distance between flight control holes

The edge of the engine base is specially designed to protect the engine in the event of an accident.

The GPS installation position is reserved inside the frame, the rational arrangement ensures ideal aesthetics of the space-consuming space.

GEP-CB4 Includes

1 x 2.0mm bottom plate

1 x 1.5mm Top Plate

2 x 2.5 mm front panel

2 x 2.5mm back plate

1 x 2.0mm front tire

1 x 2.0mm rear tire

4 x (M2*25) aluminum stands

2 x(M2*20.5) Aluminum pins

6 x (M2*6) Round Head Screws

14 x (M2*8) Round Head Screws

4 x (M2*10) Round Head Screws

4 x (M2*4) Round Head Screws

8 x (M2) Push Block Nuts

8 x (M2*2) Plastic nuts

8 x (M2*18) Plastic screws

1 x 3D Printing Crush Barrier Chamber

1 x Red Antenna Mounting Part

1 x Red TBS Antenna Mounting Part

2 x Rechargeable battery

8 x Shock absorbing pad for landing

2 x Antenna protection tube

4 x Rubber shock absorbing pad

2 x (M15*180mm) Battery Strap

2 x (M15*180mm) battery strap

1 x (1.5mm) L-key

1x plastic plastic plate