GEPRC TAKER F722 BLS 65A V2 STACK

The GEPRC Taker F722 HD V2 65A Stack is a robust, high-performance electronics system designed for FPV drones, offering up to 8S voltage support on the ESC side. It combines the GEP-F722-HD V2 flight controller with a capable 4-in-1 ESC, giving pilots an incredibly smooth flight experience and easy, solderless integration with digital video systems.

Features

High-performance STM32F722 main flight controller chip

Equipped with the ICM42688-P gyroscope for stable and responsive tracking

16MB onboard Blackbox memory space for telemetry logging

Built-in LC filter to ensure clean power distribution

Modernized USB Type-C interface

Direct plug-and-play port for DJI Air Unit integration

Paired with the TAKER H65_8S_BLS 65A 4IN1 ESC for highly efficient power management and smooth performance

Simple and effective installation method with vibration-damping mounts ensuring stable gyro operation

Independent dual BEC with 9V@2.5A and 5V@3A outputs

GEP-F722-HD V2 Flight Controller Specifications

MCU: STM32F722

IMU: ICM42688-P (SPI)

Air Unit Connection: Direct plug-and-play port for DJI Air Unit

Blackbox: 16MB onboard Flash

USB Interface: Type-C

Barometer: Supported

OSD: Betaflight OSD with AT7456E chip

BEC Output: 5V@3A, 9V@2.5A dual independent BECs

Firmware Target: GEPRCF722

Dimensions: 36.85×36.85 mm (30.5×30.5 mm mounting pattern, φ4mm holes reduce to φ3mm with silicone damping grommets)

Input Voltage: 3-6S LiPo

UART Ports: 5

Power Filtering: Onboard LC filter

Weight: 8.1 g

TAKER H65_8S_BLS 65A 4IN1 ESC Specifications

Input Voltage: 3-8S LiPo

Current Sensor (Amperometer): Supported

Continuous Current: 65A

Burst Current: 70A (for 5 seconds)

Protocols Supported: Dshot 150/300/600

Dimensions: 42×45.7 mm (30.5×30.5 mm mounting pattern, φ4mm holes reduce to φ3mm with silicone damping rings)

Weight: 14.9 g

Firmware Target: B_X_30

Package Contents

1 x Flight Controller board

1 x 4-in-1 ESC board

1 x Capacitor

1 x DJI Air Unit adapter cable

1 x Flight controller adapter cable

1 x XT60 power cable

4 x M330 screws

4 x M325 screws

8 x Nylon nuts

8 x Silicone anti-vibration grommets

2 x SH1.0 4-pin silicone cables

1 x Camera connection cable