GEPRC TAKER F405 BLS 100A 8S STACK

The GEPRC TAKER F405 8S 100A Stack is an ultra-high-performance power and flight control system built specifically for heavy-duty, high-power FPV drones. Featuring native 8S LiPo battery support on both the flight controller and ESC, this system relies on the STM32F405 processing core and a massive 100A continuous current 4-in-1 ESC with a dual MOS layout. It offers full plug-and-play compatibility with digital video networks like the DJI O3 Air Unit, up to 8 motor outputs, and a solid array of peripheral connections.

Features

High-performance STM32F405 main flight controller chip

Equipped with the ICM42688-P gyroscope for stable and precise tracking

Full high-voltage support up to 8S LiPo batteries

16MB onboard Blackbox memory space for telemetry logging

Built-in LC filter to ensure clean power distribution

Modernized USB Type-C interface

Direct plug-and-play port for DJI Air Unit integration

Paired with the TAKER H100_8S_BLS 100A 4IN1 ESC featuring a Dual MOS design to handle massive current demands for a silky-smooth flight experience

Simple and robust installation method with vibration-damping hardware ensuring stable gyro performance

Independent dual BEC with high-power 12V@3A and 5V@3A outputs

GEP-F405-8S Flight Controller Specifications

MCU: STM32F405

IMU: ICM42688-P (SPI)

Air Unit Connection: Direct plug-and-play port for DJI Air Unit

Blackbox: 16MB onboard Flash

Barometer: Supported

Motor Outputs: M1–M8 (supports octocopter configurations)

USB Interface: Type-C

OSD: Betaflight OSD with AT7456E chip

BEC Output: 5V@3A, 12V@3A dual independent BECs

Firmware Target: GEPRCF405_BT_HD

Dimensions: 37x37mm

Mounting Pattern: 30.5×30.5 mm (φ4mm holes, reducible to φ3mm with silicone damping grommets)

Input Voltage: 3-8S LiPo

UART Ports: 6

Power Filtering: Onboard LC filter

Weight: 8.3 g

TAKER H100_8S_BLS 100A 4IN1 ESC Specifications

Input Voltage: 3-8S LiPo

Current Sensor (Amperometer): Supported (Scale value: 200)

Continuous Current: 100A

Burst Current: 105A (for 5 seconds)

Protocols Supported: Dshot 150/300/600

Dimensions: 56.3*61.1 mm (30.5×30.5 mm mounting pattern, φ4mm holes reduce to φ3mm with silicone damping rings)

Weight: 28.8 g

Firmware Target: B_X_3

Package Contents

1 x Flight Controller board (FC)

1 x 4-in-1 ESC board

1 x Capacitor

1 x DJI O3 3-in-1 connection cable

2 x Flight controller adapter cables

1 x SH1.0 4-pin silicone cable

1 x Camera connection cable

1 x VTX connection cable

1 x XT90 power cable

4 x M330 screws

4 x M325 screws

8 x Nylon nuts

12 x Silicone anti-vibration grommets