- Availability: Предзаказ
- Product Code: GP105750
- Product overview
- Reviews (0)
HD VTX has pioneered a new upgrade, and the new DJI O3 Air Unit VTX has taken the digital system to a new level. The GEPRC team is upgrading and optimizing the overall performance based on the MARK5. At the same time, it will be equipped with the DJI O3 Air Unit to develop the new MARK5 O3 version.
The newly upgraded 7075-T6 aluminum alloy camera side plate is sturdy and durable. It can be fully adapted to the new DJI O3 camera with a 155° field of view (FOV), and the recording specification can support up to 4K 60FPS. We have also specially designed TPU mounting parts for the O3 VTX module and equipped it with an air intake cooling port, which facilitates adequate heat dissipation for the Air Unit. The MARK5 O3 uses the latest TAKER F722 BT BL32 50A STACK from GEPRC with an ICM 42688P gyroscope for smooth flight, redundant performance and ports, and supports wireless Bluetooth connection for setup. GEP-BL32 50A 96K 4IN1 ESC with GEPRC 2107.5 motor and new Gemfan 5136 propellers, possessing high power. The MARK5 O3 comes with two different camera mounts, which can be equipped with a full range of GP action cameras, as well as Naked GP 8/10, Insta 360 GO2, and Caddx Peanut, etc., to record the beautiful moments of your flight.
This time, the MARK5 O3 will broaden your horizons, let you fly beyond what you have ever seen, and bring more possibilities for FPV creation.
Change Log
April 28, 2024: GEPRC MARK5 DC FC changed from GEP-F722-HD-BT to GEP-F722-BT-HD V3 FC,
April 28, 2024: ESC changed from SPAN G50A BLHeli_32 4IN1 50A 4-6S ESC to GEP-BL32 50A 96K 4IN1 ESC,
April 28, 2024: Stack changed from SPAN F722-BT-HD V2 STACK to TAKER F722 BT BL32 50A STACK.
Features
Upgraded aluminum alloy lens side plate, durable and more visually appealing
Built-in Bluetooth, supports wireless mobile phone connection for parameter setting
Designed specifically for freestyle with a squashed-X arm design.
The HD version uses DJI's new O3 VTX, clear image, stable signal, low latency, long distance, and supports recording up to 4K/60fps.
GEP-BL32 50A 96K 4IN1 ESC with the latest GEPRC 2107.5 motor, with strong power, fast response speed, precise throttle control, and smooth flight
Unique frame shock absorption design, less vibration, safe and stable electronic system operating environment
With an independent capacitor and buzzer cabin, the operating environment of the entire drone is extremely stable, without shaking or jitter.
Two types of 3D-printed camera mounts are designed, which can be installed with a full range of GP cameras, as well as naked GP 8, Insta 360 GO2, and Caddx Peanut. The shooting effect is stable and clear
Add coral orange and emerald green colors to the O3 version to add more color to your flight
MARK5 O3 is optimized for freestyle, with smoother flight
Specifications
Model: MARK5 HD O3 Quadcopter
Brand: GEPRC
Frame: GEP-MK5 O3
Wheelbase: 225mm
Top plate: 2.5mm
Bottom plate: 2.5mm
Arm plate: 5mm
FC System: GEP-F722-BT-HD V3 FC
MCU: STM32F722
Gyro: 42688-P (SPI)
OSD: BetaFlight OSD with AT7456E chip
ESC: GEP-BL32 50A 96K 4IN1 ESC
VTX: DJI O3 Air Unit
Camera: DJI O3
Propeller: Gemfan 5136
Antenna: DJI O3 Antenna
Motor: SPEEDX2 2107.5-1960KV (6S version) / SPEEDX2 2107.5-2450KV (4S version)
Weight: 404.9g (MARK5 HD O3, including 3D-printed parts)
Receiver: PNP, TBS Nano RX, ELRS 2.4G
Recommended battery: LiPo 4S 1300mAh-1800mAh (4S version) / LiPo 6S 1050mAh-1550mAh (6S version)
Package:
1 x MARK5 HD O3 Quadcopter
4 x Gemfan 5136 propellers (pair)
1 x M15x250mm battery strap
2 x M20x220mm battery strap
2 x Silicone battery pads
1 x 3D-printed parts
1 x Action camera mount holder
1 x Screw set
1 x Screwdriver set
1 x Antenna fixed tube