GEPRC SMART16 Freestyle FPV Drone

Introducing the new 1.6-inch GEPRC SMART16 mini quadcopter, which is available in 5 versions: PNP, AC900, TBS Nano, ELRS 915, and ELRS 2.4G

SMART 16 continues the consistent lightweight design concept of the Phantom series. The 1.5mm thick carbon fiber arm with a 1mm thick top plate allows it to be both lightweight and sturdy at the same time. We used high-potential 0803 11000KV brushless motors paired with 1610 propellers, so you can easily freestyle at your favorite field or bando. The quadcopter comes with a 3D-printed battery holder and is powered by a 2S 380mAh battery, consisting of two 1S batteries connected in series, which makes it weigh only 53.0g and provides 4 minutes of flight time.

We strive for lower weight, a better flight experience, and greater functionality for all our products!

Technical specifications

Model SMART16

Frame: GEP-ST16

Wheelbase size: 78 mm

Top plate thickness: 1.0 mm

Bottom plate thickness: 1.5 mm

Arm thickness: 1.5 mm

FC: STABLE F411 (1616mm)

MCU: STM32F411

Gyroscope: 6-axis

OSD: BetaFlight OSD with AT7456E chip

ESC: STABLE F411 BLheli_S 4IN1 12A ESC (1616mm)

VTX: STABLE F411 VTX 5.8G 200mW (16*16mm)

Camera: Caddx Ant

Propeller: GemFan 1610-2

Antenna: UFL 5.8G stick VTX antenna

Motors: GR0803-11000KV

Weight: 36.0 g

Receiver version: PNP (without receiver), AC900, TBS Nano RX, ExpressLRS 915, ExpressLRS 2.4G

Features

Miniature 1.6-inch size + light weight, only 36.0 g

Uses two 1S batteries in series for greater power output

Equipped with a 200mW 5.8G VTX, with 6 frequency bands and 8 frequency selection points

Caddx Ant camera with high image quality. Sharp and clear!

Independent battery compartment design can be attached on top or bottom, making battery replacement easy and convenient

The latest 0803 motor is combined with the 1610-2 propeller, which provides maximum power and efficiency

Suitable for both freestyle and racing

Includes a full set of high-quality 3D-printed parts for a wonderful flight experience

Included

1 x SMART16 set

4 GemFan 1610-2 propellers

2 x Battery strap M12x120mm

2 x Battery non-slip mat

1 x Spare printed set

1 x Spare screw set

1 x Spare screwdriver set