GEPRC Cinebot25 S HD Wasp Quadcopter

The Cinebot25 is a model that delivers exceptional control and stable aerial filming capabilities. It debuts with a revolutionary exterior design and incredible performance.

The Cinebot25 comes in two different power system configurations: the standard version equipped with SPEEDX2 1404 motors, and the S (Sport) version with SPEEDX2 1505 motors.

The vibration-dampening camera design features four silicone dampening balls to reduce vibrations and filter out noise, ensuring high-quality video footage. Its integrated frame utilizes modified, revolutionary materials to provide the perfect balance of stiffness and flexibility, minimizing the risk of damage. The fuselage design is fully compatible with various video transmission systems, such as the DJI O3 Air Unit, and includes a convenient port design for quick and efficient access to the SD card slot and USB port.

Following extensive parameter testing, the Cinebot25 utilizes the TAKER G4 45A 8Bit AIO FC, breathing new life into your video shooting process.

Changelog:

August 3, 2024: The Cinebot25 AIO flight controller has been updated from the TAKER G4 45A BL32 AIO to the TAKER G4 45A 8Bit AIO.

Key Features:

Integrated exterior design: Features a reinforced carbon fiber plate combined with a modified co-injection molded material on the bottom plate.

Vibration-dampening camera cover provides improved stability during video recording.

Two power versions available: Choose between the standard version with SPEEDX2 1404 motors or the upgraded Sport version with SPEEDX2 1505 motors.

Convenient rear buttons: The Type-C port and Boot button are positioned at the rear of the drone for easy parameter configuration.

Optimized antenna mount: Features an optimized silicone T-shaped antenna mounting component.

Lightweight setup: The Cinebot25 Lite quadcopter paired with a 4S 720mAh LiHV battery weighs under 250g.

Powerful G4 45A 8Bit AIO: The new TAKER G4 AIO main controller ensures stable flight calculations, while its built-in 8-bit 45A ESC provides robust overcurrent protection.

O3 VTX compatibility: Seamless integration with the O3 Air Unit makes it easy to insert memory cards and download recorded footage.

Dedicated receiver mount: A custom mounting post simplifies internal space management.

Versatile battery mounting: Supports various battery sizes using a combined securing method of aluminum components and straps.

Specifications:

Model: Cinebot25 S Wasp Quadcopter

Frame: GEP-CT25 Black

Wheelbase: 115mm

Flight Controller: TAKER G4 45A AIO

MCU: STM32G473CEU6

Gyroscope: ICM 42688-P

FC Firmware: TAKERG4AIO

ESC: 45A 8Bit ESC

Motors: SPEEDX2 1505 4300KV

Propellers: HQprop DT63mm 4-blade

Power Connector: XT30

VTX: Runcam Link

Camera: Runcam Wasp

Antenna: Peano 5.8G LHCP UFL

Receiver Options: PNP (built-in VTX receiver) / ELRS 2.4G / TBS NanoRX

Weight (Cinebot25 S Wasp PNP Version): 180g ± 1g

Recommended Battery: 4S 650mAh–850mAh LiPo

Flight Time: 5–7 minutes 30 seconds (Estimated time based on low-speed flight. Actual flight time depends on individual flying styles.)

Package Includes:

1 × Cinebot25 Quadcopter

1 × HQprop DT63mm 4-blade Propellers (Set)

2 × Anti-slip Battery Pads

1 × 15×150mm Battery Strap

1 × 15×180mm Battery Strap

1 × Naked GoPro Base

1 × O3 Heatsink

1 × Spare Screws Set

1 × 1.5mm L-wrench

1 × Frequency Binding Tool

1 × Dampening Ball Installation Tool

Spare Screws Set Includes:

2 × Camera Dampening Balls

4 × M2 Nuts

6 × M26 Button Head Screws

4 × M218 Countersunk Screws

4 × M1.68 Socket Cap Screws

4 × M25 Round Head Screws

4 × M1.610 Hex Screws

2 × M212 Countersunk Screws

2 × M2 Self-locking Nuts

2 × T-shaped Silicone Antenna Mounts