BetaFPV BT2.0 connector (10pcs)

BT2.0 connector represents the most significant revolution in 1S Whoop Drone. Not sure if you should switch to BT2.0? Learn more from Joshua Bardwell's video - Proof that the BT2.0 connector is better than the PH 2.0.

KEY HIGHLIGHTS

The BT2.0 connector has effectively reduced the internal resistance of the connector by upgrading the crimped pins to a banana connector and increasing the cross-sectional area of the banana connector.

Thanks to these connectors, it can support 9A continuous current and 15A burst current, while the PH2.0 connector supports 4.5A continuous current.

By solving the voltage sag problem, the discharge of the 300mAh 1S BT2.0 LiPo becomes more efficient. Pilots can enjoy longer flight time without the anxiety of a low voltage warning.

Compared to the crimped pins of the PH2.0, the BT2.0 connector is more durable, allowing for greater current discharge at the same capacity and providing much more power. You can get 2 minutes of full-throttle flight on the Meteor65 if you use our BT2.0 300mah 1S battery.

SPECIFICATION

Size: Male connector - 6.04.210.5mm / Female connector - 6.04.28.3mm

Weight: Male connector – 0.34g/PCS / Female connector – 0.24g/PCS

Note: The plastic terminal housing defines the positive and negative poles and must be welded according to the instructions.

BT2.0 Connector

The exclusive BT2.0 connector, designed by BETAFPV, has broken the bottleneck of the PH2.0 connector. The BT2.0 connector effectively reduced the internal resistance of the connector to provide more transmitted current, which means it supports 9A continuous current (15A burst), provides more power and longer flight time on 1S brushless drones, whereas PH2.0 only supports 4.5A. You can enjoy more flight time without worrying about the low voltage warning thanks to the solution to the voltage sag problem. For additional instructions, click here.

There is a comparison chart between the BT2.0 connector and the PH2.0 connector (solid pin version) in the BETAFPV 1S 300mAh battery. In this test, the discharge current is 9A. You can see that with the BT2.0 connector, it discharges twice as fast (about 2 minutes).

PACKAGE

10* BT2.0 connector