- Availability: In Stock
- Product Code: 01030014_1
- Product overview
- Reviews (0)
- Related products
The BetaFPV LAVA 1S 300mAh battery pack is engineered for micro Whoop pilots demanding maximum performance and raw power from their 1S platforms. Utilizing a revolutionary Z-Folding construction process, this battery outperforms traditional wound cells by delivering higher energy density and elevated discharge thresholds. With an aggressive 75C continuous discharge rate, it provides rapid acceleration, explosive punch, and unmatched flight agility. Equipped with a solid-pin BT2.0 connector operating at a 3.8V nominal rating, the LAVA series minimizes internal resistance to transfer pure, efficient power directly to your high-KV brushless motors.
Features: Advanced Z-Folding manufacturing technique boosting energy density by 5% over standard wound configurations; High 75C continuous discharge rating delivering instant throttle response and clinical maneuverability; Optimized cell structure offering a 0.2V higher discharge platform under heavy loads compared to traditional wound batteries; Sleek LAVA series design layout embodying explosive power delivery.
Model: LAVA 1S 300mAh 75C
Type: LiHV
Capacity: 300mAh
Configuration: 1S1P
Nominal Voltage: 3.8V
Max Charge Voltage: 4.35V
Energy: 1.14Wh
Continuous Discharge Rate (C-Rating): 75C
Dimensions: 63.5 × 11 × 6.4 mm
Weight: 8.3 g
Connector: BetaFPV BT2.0
Compatibility: High-performance 1S brushless micro Whoops and ultra-lightweight racing platforms equipped with a BT2.0 power lead
Package Includes: 5 × LAVA 1S 300mAh 75C LiHV Batteries
Warnings: Always fully charge new battery packs prior to their initial flight deployment; Use only specialized smart chargers equipped with dedicated LiPo/LiHV profiles, and never leave charging batteries unattended; Keep the battery well away from all flammable, volatile, or hazardous materials during the charge cycle; Never overcharge the battery beyond 4.35V per cell for LiHV chemistry; Do not discharge the pack below 3.0V per cell under operational load conditions; Avoid storing fully charged batteries for more than 3 days, maintaining a storage voltage between 3.8V and 3.9V per cell for long-term preservation; Do not puncture, crush, disassemble, short-circuit, or expose the pack to open flames or direct heat sources; Immediately discontinue use and safely dispose of any cells that show signs of bloating, swelling, or physical deformation.