BetaFPV 6-port 1s charger with adapter

The BetaFPV 6-Port 1S Battery Charger is an ultra-compact, high-efficiency multi-channel charging station explicitly engineered for Whoop and micro FPV drone pilots using 1S lithium cells. Featuring an innovative dual-connector interface layout on every channel, the charger natively accepts both PH2.0 and BT2.0 battery leads without requiring external adapter cables. Powered by an advanced USB Type-C input architecture supporting high-throughput Power Delivery (PD3.0) and Quick Charge (QC3.0) protocols, this pocket-sized hub dynamically regulates up to 30W of total input power to supply a fast, independent 1.0A charging current to six batteries simultaneously.

Features

Dual-Connector Interface Layout: Outfitted with six independent charging channels, each integrating two distinct physical port footprints (BT2.0 and PH2.0), allowing pilots to maintain mixed battery fleets without using loose adapter leads.

High-Throughput USB-C Power Input: Leverages a modern USB Type-C connection terminal that dynamically negotiates wide-range power input envelopes through advanced PD3.0, QC3.0, and BC1.2 multi-charging fast protocols.

Simultaneous 6-Port Fast Charging: Delivers a dedicated, regulated current of up to 1.0A per channel when linked to a high-capacity power source, capable of fully replenishing six BT2.0 300mAh 1S flight packs concurrently in approximately 25 minutes.

Dedicated Voltage & Standby Control: Features a tactile manual hardware toggle switch designed to easily switch the charging profile configuration between high-voltage target limits and a safe system shutdown/standby state.

Independent LED Diagnostics: Every charging channel features its own clear green LED indicator providing instant, real-time visual feedback regarding pack detection, active current transfers, or circuit faults.

Universal Wall Adapter Bundle: Packaged with a matching heavy-duty 30W Type-C wall power adapter, creating an immediate out-of-the-box bench or travel solution optimized for multi-port high-amperage output limits.

Specifications

Brand: BetaFPV

Model Name: 6-Port 1S Charger and Power Adapter Combo

Primary Input Interface Connection: USB Type-C Terminal Port

Input Operating Voltage Range: DC 5.0V – 12.0V

Maximum Rated Input Power Infrastructure: 30 W

Absolute Maximum Input Current Limit: 2.5 A

Concurrent Charging Output Channels: 6 Isolated Lanes

Native Battery Interface Sockets: BT2.0 and PH2.0 Dual-Frame Blocks (Per Channel)

Supported Battery Chemistry Target: High-Voltage Lithium (LiHV) Only

Target Terminal Voltage Cutoff Threshold: 4.35 V

Maximum Charging Current Throughput: 1.0 A Max Per Single Channel Port

Integrated Fast-Charge Protocols: USB Power Delivery (PD3.0) / Quick Charge (QC3.0) [5V / 9V / 12V] / BC1.2

Physical Footprint Dimensions: 79 mm × 46 mm × 19 mm

LED Status Diagnostic Matrix

Flashing Green Indicator: Active standby state; channel circuit is live but no battery pack has been detected.

Solid Green Indicator: Active high-amperage charging lifecycle is currently in progress.

Extinguished Indicator (No Light): Recharging sequence is finalized (cell cutoff achieved), or the port is in an inactive state.

Operational Instructions

Input Power Interface Connection: Plug the included high-speed USB Type-C to Type-C cable into the charger's input terminal and connect the opposite side to the bundled 30W power adapter. Insert the adapter into a standard wall outlet.

Target Voltage Profile Initialization: Toggle the physical hardware slider switch on the side panel to the "4.35V" configuration to prime the internal cutoff regulators for LiHV cells, or toggle it to the "OFF" position for safe standby.

Flight Battery Attachment: Connect your 1S battery leads into an open channel lane, observing correct seating orientation. The corresponding status LED will shift from flashing to solid green to signal active current flow.

Cycle Completion & Safe Removal: Monitor the LED array. Once a channel's indicator light turns off completely, cell voltage validation is finalized. Promptly disconnect the replenished 1S flight battery pack from the hardware grid.

Notes

Dual-Connection Strict Restriction: Although each charging channel features both a PH2.0 and a BT2.0 socket footprint, they share the same internal power processing pipeline. You must never plug two batteries into the same channel lane simultaneously. Attempting to charge two cells on a single port concurrently will severely alter cell telemetry tracking, reduce the operational lifespan of the batteries, and present a critical risk of permanent cell damage or thermal hazards.

Input Wattage Scaling Bottlenecks: To achieve the full 1.0A charge velocity across all six channels concurrently, the unit must be powered by a dedicated 30W or greater USB-C adapter. Using lower-tier power bricks (such as standard non-fast-charging 5V/2A adapters) forces internal power scaling, which automatically reduces current limits well below 1.0A per port and significantly extends charging times.

Hardware Line Error Diagnostics: If a channel's LED indicator remains completely dark/extinguished when no battery is plugged in (failing to display the standard standby flash routine), it indicates an internal component malfunction or circuit track fault on that specific lane. Discontinue use of that corrupted channel immediately.

Package

1 x BetaFPV 6-Port 1S LiHV Smart Balance Charger Board Core Module

1 x 30W Type-C Power Delivery Wall Adapter (EU Specification)

1 x High-Speed USB Type-C to Type-C Data Power Cable

1 x Technical User Operational Reference Manual