Flywoo HDZero Nano V3 Camera

The HDZero Nano V3 is an ultra-lightweight, high-definition digital FPV flight camera co-engineered by RunCam and HDZero explicitly for micro whoop airframes, toothpick platforms, and weight-critical digital builds. Stripping away mechanical bulk to achieve a bare module weight of just 2.2 grams, this nano-sized digital camera integrates a massive, high-sensitivity 1/2-inch CMOS sensor. Designed to deliver a crisp, low-latency 720p digital video stream directly to the HDZero video transmitter ecosystem, it combines a wide field of view with incredible starlight-level light processing, providing pilots with an exceptional high-definition tracking solution for both tight indoor racing gates and unpredictable low-light environments.

Features

Optimized HDZero Ecosystem Alignment: Custom-engineered for seamless digital hardware integration with HDZero and RunCam digital video transmission modules.

Massive 1/2-Inch High-Sensitivity Sensor: Outfitted with an oversized 1/2-inch CMOS core boasting an impressive 10650 mV/Lux-sec sensitivity rating, yielding crisp visual capture with minimal noise grain under low-light conditions.

Ultra-Lightweight Nano Profile: Shaves critical bulk down to a 14mm × 16mm × 14mm footprint weighing an astonishing 2.2 grams, allowing high-definition digital systems to be deployed on micro whoop builds without destroying power-to-weight ratios.

Wide-Angle Optical Field of View: Delivers an expansive 155-degree diagonal field of view, providing exceptional peripheral awareness for aggressive proximity maneuvers.

Adjustable Aspect Ratio Profiles: Incorporates an internal engine that allows pilots to toggle between a native 4:3 racing layout and a widescreen 16:9 cinematic view to match any FPV goggle configuration.

Ultra-Low Latency Processing: Engineered to match HDZero’s zero-latency fixed frame rate standard, delivering ultra-smooth 720p digital data processing at 60fps to match instantaneous pilot control inputs.

Specifications

Brand: RunCam / HDZero

Model Name: HDZero Nano V3 HD Digital FPV Camera Matrix

Image Sensor Hardware: 1/2-Inch High-Sensitivity CMOS Sensor Core

Digital Video Resolution Target: 720p High-Definition @ 60 fps (Native 4:3)

Sensor Sensitivity Rating: 10650 mV/Lux-Sec

Selectable Aspect Ratio Profiles: 4:3 Standard (Default) / 16:9 Widescreen (Switchable)

Optical Field of View (FOV): 155° Diagonal (D) / 126° Horizontal (H) / 94° Vertical (V)

Shutter Mechanism Profile: Rolling Shutter Matrix

Primary Input Power Demand: DC 3.3 V Regulated Rail

Average Power Consumption Draw: 0.5 W

Physical Component Footprint: 14 mm × 16 mm × 14 mm (Nano Size Standard)

Physical Structural Net Mass: 2.2 g (Camera Unit Only)

Operational Instructions

Mechanical Mounting Integration: Secure the 14mm nano camera housing between the structural side plates of your micro drone frame or inside a designated whoop canopy using standard micro hardware screws, adjusting the vertical tilt angle to match your forward flight velocity.

Digital MIPI Ribbon Interlocking: Obtain a compatible high-shielding HDZero MIPI camera ribbon cable (sold separately). Guide the cable ribbon terminal head straight down into the camera's rear MIPI socket interface until it securely seats, ensuring the delicate contact pins are completely aligned.

VTX Connection Interlocking: Route the opposite end of the MIPI cable into your HDZero video transmitter module. Lower any structural locking bars or clamp plates to ensure the high-frequency digital connection lines do not vibrate loose under high-G impacts.

Aspect Ratio System Calibration: Power up your HDZero FPV Goggles or VRX monitor module and link a flight pack to the drone. Navigate into the VTX on-screen display (OSD) settings menu to toggle between the native 4:3 frame profile or the widescreen 16:9 configuration depending on your viewing hardware preferences.

Pre-Flight Video Validation: Confirm that the digital 720p video stream initializes instantly inside your viewing goggles, and check that exposure levels and low-light tracking curves adjust smoothly when rotating from dark ground shadows into bright overhead ambient lights.

Notes

MIPI Ribbon Cable Omission: This digital camera package ships from the factory without a MIPI ribbon connection cable. You must purchase a standalone HDZero-compatible MIPI cable tailored to the specific length required by your airframe to complete the video transmission path.

Strict 3.3V Input Limit Policy: This digital nano camera is engineered to run exclusively from a highly stable, regulated 3.3V DC power bus provided via the HDZero VTX unit. Never attempt to wire this camera module directly to a standard 5V pad or raw multi-S battery power lines, as bypassing input constraints will instantly cause unrecoverable digital processor burnout.

Delicate Digital Component Care: The micro-thin digital MIPI ribbon cable transmits extremely high-frequency data tracks. Avoid pinching, making sharp 90-degree creases, or routing the cable lines across raw carbon fiber frame edges, as microscopic trace fracturing will cause immediate digital video blackouts, erratic data freezing, or permanent connection failure.

Avoid Mechanical Over-Tightening: When locking the micro mounting screws into the nano camera's composite casing, stop turning immediately once light resistance is felt. Excessive torque can crack the 14mm chassis framework or strip out the soft internal threads.

Package

1 x RunCam HDZero Nano V3 Digital HD FPV Flight Camera Module