Flywoo RunCam Thumb Pro V2 Camera + ND Filter Set

The RunCam Thumb Pro V2 is an ultra-lightweight action camera explicitly engineered for micro FPV drones, cinewhoops, and toothpicks where structural weight restrictions are critical. Weighing an astonishing 16 grams, this miniature camera features a high-grade 12MP Sony IMX577 image sensor capable of recording crisp 4K footage at 30fps. Outfitted with an integrated internal gyroscope for post-flight Gyroflow stabilization, a revised 155-degree panoramic field of view, and a complete suite of swappable ND filters, the Thumb Pro V2 allows cinematic footage capture on sub-250g platforms without destroying power-to-weight flight dynamics.

Features

Ultra-Lightweight 16g Footprint: Shaves physical bulk down to a micro action framework, allowing cinematic 4K recording to be deployed on platforms too small to carry standard action cameras.

Sony IMX577 12MP Sensor Core: Houses a high-performance Sony image sensor that captures vivid color profiles and sharp edge resolution across variable lighting scenes.

Integrated Gyroflow Stabilization Pipeline: Logs internal high-frequency gyroscope tracking telemetry directly into the video file container, enabling glass-smooth stabilization using post-flight Gyroflow software.

Swappable Snap-On ND Filter Suite: Includes dedicated ND8, ND16, and ND32 optical glass filters to control shutter speeds under blinding ambient sunlight, effectively eliminating high-frequency motor jello ripples.

Dual-Orientation Cinematic Framing: Supports native horizontal action capture alongside vertical filming profiles, matching modern social media formats without resolution-destroying digital cropping.

QR-Code Configuration and Remote Control: Allows immediate field parameter tuning by flashing configuration QR codes from the RunCam smartphone app, with secondary wire pads for remote recording control via your flight controller.

Specifications

Brand: RunCam

Model Name: Thumb Pro V2 Ultra-Light HD Action Camera

Image Sensor Hardware: 12-Megapixel Sony IMX577 CMOS Core

Optical Field of View (FOV): 155° Panoramic Perspective Window (Revised Version)

Native Video File Format: MP4 (H.264 / AAC Audio Matrix)

Integrated Data Logging: Onboard Hardware Gyroscope (Native Gyroflow App Compatibility)

Primary Power Allocation Demand: DC 5.0 V External Regulated Source Input

Average Component Power Draw: 500 mA Peak Draw @ DC 5.0 V

Wired Interface Connection Port: Micro USB (Data Extraction / Power Feed Alternative)

Storage Media Accommodation: MicroSD Card Interface Slot (Supports up to 256GB / U3 Rated Recommended)

Physical Component Footprint: 54.0 mm × 25.5 mm × 21.0 mm

Physical Structural Net Mass: 16.0 g (Camera Body Unit Only)

Video Recording Resolution Matrix

Ultra-HD Cinematic Capture: 4K @ 30 fps

High-Frame Rate Fluid Motion: 2.7K @ 60 fps

Quad-HD Structural Frame Layout: 1440p @ 60 fps

High-Definition Super Slow-Motion: 1080p @ 120 fps / 60 fps

Operational Instructions

Mechanical Mount Integration: Secure the included lightweight mounting bracket onto your cinewhoop or micro drone canopy plate. Slide the camera housing into the cradle jaws, confirming it clicks straight, and adjust the forward pitch tilt before tightening the bracket hardware.

Wiring Interface Mapping: Connect the provided external power cable loom to the rear input pins of the camera. Solder the opposite bare wire ends to your Flight Controller (FC) circuit pads: Red wire to a clean, regulated +5V pad, Black wire to a Ground (GND) pad, and optional telemetry lines to a free FC RX pad for remote control mapping.

QR-Code Parameter Configuration: Power on the drone setup to initialize the camera. Open the RunCam companion app on your smartphone, select your target video resolution, frame rates, and shutter speed limits, generate the configuration QR code, and hold it directly in front of the camera lens until the status indicator blinks to confirm sync.

Optical ND Filter Deployment: Match the ambient environment brightness to the correct glass filter element (ND8 for overcast conditions, ND16 for standard sunny fields, ND32 for extreme direct solar glare). Gently press the chosen filter onto the lens bezel track until it seats flush against the optical housing.

Storage Media and Recording: Insert an empty, formatted U3-class MicroSD card into the side memory slot. Press the physical tactile button on the camera casing or use your radio controller switch layout to start the recording pipeline, confirming the status LED flashes into active tracking mode.

Notes

Strict Regulated 5V Input Limit: This ultra-lightweight action camera does not incorporate internal high-voltage battery regulators. It must be powered strictly by a stable, clean, and regulated 5.0V DC external source. Direct connection to raw, unregulated multi-S battery balance leads will bypass protection lines and instantly fry the internal video processing motherboard.

Gyroflow Post-Processing Requirement: Raw footage directly extracted from the MicroSD card contains wide-angle field distortion and structural motor vibrations. To unlock smooth cinematic video output, the file must be routed through the standalone Gyroflow stabilization software application to translate the logged gyroscope metadata into balanced frame frames.

High-Speed MicroSD Card Standards: Recording high-bitrate 4K video files demands consistent, fast memory write tracks. Always utilize genuine, tier-one MicroSD memory cards with a minimum U3 or V30 speed specification rating to prevent mid-flight data pipeline buffering bottlenecks or corrupted file endings.

Thermal Stabilization Prep Management: High-density micro processing components generate rapid localized heat build-up while sitting idle on the bench. Avoid leaving the flight battery connected on the ground for extended setup periods without active cross-flow airflow or field ventilation fans to protect internal chip integrity.

Package

1 x RunCam Thumb Pro V2 Ultra-Light 4K Action Camera Module

1 x Precision Injection-Molded Camera Mounting Bracket Cradle

1 x Snap-On Optical ND Filter Expansion Pack (ND8, ND16, ND32 Elements)

1 x Dedicated Multi-Wire Direct Power Connection Harness Loom

1 x Technical Hardware Mounting Screw Installation Pack

1 x Technical Product User Instruction Guide