FPV Monitor BetaFPV (ArtLynk HD)

BetaFPV Monitor is a compact and bright HD FPV monitor designed for use in the ArtLynk ecosystem (based on the Artosyn AR803X chipset). The device combines a built-in P1 HD VRX digital video receiver, a 4.5-inch high-brightness LCD display (1000 nits) and a DVR function for recording video in 1080p@60fps. The monitor is a great solution for flight monitoring, field equipment setup, and as an external screen for directors, spectators or pilots. Thanks to the standard 1/4" screw hole, the device is easily mounted on a tripod, and the universal power connectors (DC 5.5×2.1mm and XT30) allow you to use a wide range of external batteries (2S-6S).

Key benefits:

Compatible with the ArtLynk ecosystem: seamless operation with BETAFPV P1 Air Unit transmitters and other devices based on the ArtLynk digital protocol.

Super bright display (1000 nits): The 4.5-inch LCD screen provides a clear and rich image even in direct sunlight.

HD video with low latency: streaming video in 1080p resolution at 60 frames/sec with a bitrate of 25 Mbps.

Built-in DVR: supports recording flight video directly to a MicroSD memory card with a capacity of up to 1 TB.

Flexible power supply: wide operating voltage (5.5–26.4 V) with support for DC5.5 and XT30 connectors.

Compact and lightweight: weighs only 143 g and has a standard 1/4" tripod mount.

Main characteristics

Screen diagonal: 4.5 inches

Matrix type: LCD

Display resolution: 1920 × 1080 @ 60 Hz

Brightness: 1000 nits

Streaming resolution: 1080p @ 60fps

Video bitrate: 25 Mbps

Latency (Glass-to-Glass): ~60 ms

Operating frequency range: 5.3 – 5.8 GHz

Signal transmission range: > 400 m

EIRP: < 23 dBm (FCC) / < 14 dBm (CE)

Support for memory cards: MicroSD up to 1 TB

Interfaces and connectors: USB-C, MicroSD slot, DC 5.5×2.1 mm, XT30

Antenna connector: RP-SMA Female (external thread, internal hole)

Input voltage: 5.5 – 26.4 V (supports 2S–6S LiPo)

Dimensions: 116.0 × 84.9 × 21.2 mm (excluding antennas)

Weight: 143 g (excluding antennas)

Package

FPV Monitor BetaFPV Monitor — 1 pc.

5.8 GHz antennas — 2 pcs.

3M adhesive tape (Hook and Loop Fastener) — 1 pc.

Instruction manual — 1 pc.