ISDT Q6 NANO 8A 200W universal charger without/power supply

The ISDT Q6 Nano is an ultra-compact, high-performance DC smart balance charger engineered to deliver robust power management for a comprehensive matrix of radio-controlled (RC) and FPV drone flight batteries. Operating on an optimized scOS 2.0 system architecture, this pocket-sized pocket powerhouse yields an impressive 200W output ceiling and up to 8.0A of charging current. The device features a pocket-friendly rounded form factor, a high-contrast 1.5-inch IPS LCD screen for reliable outdoor telemetry tracking, an advanced internal cross-flow cooling topology, and dedicated smart battery integration pipelines, making it a highly portable and efficient field tool for multirotor pilots.

Features

Pocket-Sized Ergonomic Form Factor: Re-engineered into a highly compact, rounded physical profile weighing only 118 grams, allowing it to easily slip into a field bag or pocket for ultimate travel convenience.

High-Contrast IPS Telemetry Display: Outfitted with a 1.5-inch IPS LCD screen (240×240 resolution) featuring a wide 178° viewing angle, low power draw, and automated brightness adjustments to ensure clear readability under direct sunlight.

Cross-Flow Thermal Management Matrix: Combines a precision-engineered ball-bearing cooling fan with high-conductivity silicone thermal pads and structured aluminum alloy fins, executing an efficient cross-flow airway layout to rapidly dissipate heat during high-amperage cycles.

Optimized scOS 2.0 Operating System: Advanced system firmware introduces enhanced stability, an intuitive user interface, a specialized Dark Mode theme, a customizable DC Power Supply mode, and an automated battery disposal routine.

Smart Ecosystem Synchronization: Built-in compatibility with BattGo and SmartPower communication links allows the charger to automatically interface with smart battery memory chips to instantly sync optimal charging parameters and logs.

Upgradable Micro-USB Data Interface: Equipped with a dedicated micro-USB port, enabling rapid firmware updates via a PC connection to ensure continuous system optimization, safety patches, and feature additions.

Specifications

Brand: ISDT

Model Name: Q6 Nano

Primary Input Power Interface: DC Terminal Port (XT60 Footprint)

Input Operating Voltage Corridor: DC 10.0V – 30.0V Range

Absolute Maximum Input Current Limit: 9.0 A

Output Target Voltage Window: DC 1.0V – 30.0V

Selectable Charging Current Range: 0.1 A – 8.0 A

Selectable Discharge Current Range: 0.1 A – 1.0 A

Maximum Output Charging Power Capacity: 200 W

Maximum Internal Discharge Power Capacity: 10 W

Active Cell Balancing Current Pipeline: 500 mA Per Cell

Integrated Screen Module: 1.5-Inch 240×240 IPS LCD Matrix Panel (178° Viewing Angle)

Firmware Update Interface: Micro-USB Data Terminal

Physical Structural Mass: 118.0 g

Physical Footprint Dimensions: 72 mm × 72 mm × 32 mm

Battery Chemistry Compatibility Matrix

Lithium Chemistry Standard (LiPo / LiHv / LiFe / LiIon): 1S – 6S Multicell Balanced Series

Nickel Chemistry Standard (NiMH / NiCd): 1 – 16 Cell Packs

Lead-Acid Chemistry (Pb / Gel): 1 – 12 Cell Mainlines (DC 2.0V – 24.0V)

Operational Structural Modes

DC Power Supply Mode: Bypasses standard battery balancing routines to transform the device into a variable, regulated benchtop power supply, delivering stable user-defined DC voltage and current boundaries to external peripheral gear.

Battery Scrap Disposal Protocol: Initiates a specialized, continuous low-current drain loop specifically engineered to safely draw compromised, bloated, or end-of-life lithium packs down to absolute zero volts, permanently neutralizing the cells for safe recycling and disposal.

Notes

External Power Supply Mandatory Requirement: The ISDT Q6 Nano is a standalone DC-input charging station and does not integrate an AC wall transformer. To operate the unit on a bench or in the field, you must couple it with an external DC power source, such as a dedicated AC-to-DC bench power brick, a high-capacity field battery (e.g., a large 4S–6S LiPo pack), or a deep-cycle battery supplying between 10V and 30V.

Balance Lead Mandatory Policy: When charging any multi-cell lithium pack (2S through 6S), you must connect both the primary high-current XT60 lead and the white JST-XH balance connector simultaneously. Attempting to charge multi-cell series lines without individual channel balance telemetry bypasses critical safety overrides and can cause severe cell over-voltage, localized battery expansion, or thermal hazards.

Disposal Mode Warning: The specialized battery scrap routine is explicitly engineered to permanently destroy the chemistry of the connected battery to make it safe for metal recycling. Never initiate this mode on a functional flight pack that you intend to reuse, as it will deliberately draw cell potentials down to zero, causing unrecoverable chemical death.

Package

1 x ISDT Q6 Nano 200W DC Smart Charger Base Module

1 x Technical User Operational Reference Manual