SkyRC D100neo 100W/200W Universal Dual Charger with Power Supply

The SkyRC D100neo is a high-capacity, dual-channel universal AC/DC smart balance charger and diagnostic station engineered to provide flexible power management for a comprehensive matrix of radio-controlled (RC) and FPV drone flight batteries. Featuring an advanced dual-topology processing engine, this station operates seamlessly across two completely isolated charging circuits, distributing power intelligently based on the input source. Housed in a flame-retardant PC-ABS V0 chassis and guided by a large 2.8-inch color telemetry screen, the unit combines built-in AC mainline convenience with high-throughput DC field capabilities to efficiently service multiple battery fleets simultaneously without current bottlenecking.

Features

Isolated Dual-Channel Engine: Configured with two completely independent output lanes, allowing pilots to concurrently charge separate batteries at varying states of charge or different cell configurations without cross-channel current interference.

Flexible Dual-Input Topography: Houses an internal AC transformer for efficient, self-contained bench setups directly from wall mainlines, while natively supporting a wide-range DC input port for maximum field performance.

Dynamic AC Power Allocation: Incorporates intelligent internal power scaling when connected to AC mainlines, dynamically distributing the available 100W overhead between both channels based on the instantaneous demand of each connected pack.

Flame-Retardant Structural Shell: Enclosed in a premium PC-ABS V0 grade housing engineered to provide exceptional thermal endurance, structural rigidity, and native impact protection during intense field operations.

Vibrant Telemetry Feedback Display: Integrated 2.8-inch TN color display screen reveals real-time cell voltages, operating current curves, and total capacity metrics under a rich 262K color matrix.

High-Amperage Balancing Pipeline: Outfitted with an aggressive 1.0A maximum balancing circuit that rapidly equalizes individual multi-cell series lines to ensure long-term pack safety, precise cutoffs, and lifecycle optimization.

Specifications

Brand: SkyRC

Model Name: D100neo (Dual-Channel Universal Smart Balance Charger Matrix)

Product Code Reference: SK-100199

Chassis Material Composition: Fire-Retardant PC-ABS V0

Primary Input Interfaces: AC Mainline Core / DC Power Terminal (XT60 Footprint)

AC Input Voltage Range: 100V – 240V (50 / 60 Hz Universal Line Support)

DC Input Voltage Range: 10.0V – 30.0V Field Rails

Concurrent Charging Output Paths: 2 Independent Isolated Channels

Maximum Output Charging Power (DC Source): 200 W Combined (100 W Max Per Channel Simultaneously)

Maximum Output Charging Power (AC Source): 100 W Combined (Dynamically Allocated Across Channels)

Selectable Charging Current Range: 0.1 A – 10.0 A

Selectable Discharge Current Range: 0.1 A – 2.0 A

Maximum Internal Discharge Power (Main Port): 5 W

Maximum Internal Discharge Power (Balance Port): 25 W (Evaluated on a 6S LiPo configuration)

Active Balancing Current Output: 1.0 A Maximum Per Cell

Integrated Screen Module: 2.8-Inch TN Color Matrix Screen (240 × 320 Resolution / 262K Colors)

Physical Structural Mass: 470.0 g

Physical Footprint Dimensions: 116 mm × 110 mm × 79 mm

Battery Chemistry Compatibility Matrix

Lithium Chemistry Standard (LiPo / LiHV / LiFe / LiIon): 1S – 6S Multicell Balanced Series

Nickel Chemistry Standard (NiMH / NiCd): 1 – 15 Cell Series Packs

Lead-Acid Chemistry (Pb / Gel): 3S / 6S / 12S Systems

Notes

AC vs DC Input Dynamics: To exploit the full 200W total charging throughput (100W per port simultaneously), the charger must be supplied with an optimal DC power source within the 10-30V range. When operating strictly on an AC wall outlet, dynamic internal power scaling will cap the overall maximum combined output wattage to 100W due to transformer limitations.

Balance Lead Mandatory Policy: When charging any multi-cell lithium pack (2S through 6S), you must connect both the primary high-current output lead and the corresponding white JST-XH balance connector board simultaneously. Attempting to charge multi-cell series lines without individual channel balance telemetry bypasses critical safety overrides and can cause severe cell over-voltage, localized battery expansion, or thermal hazards.

Proper Chemistry Selection Target: Always verify that the selected chemistry profile on the digital menu strictly matches the physical battery type connected. Charging a standard 4.20V LiPo pack under the elevated 4.35V LiHV profile will cause immediate cell degradation and poses a severe fire hazard.

Package

1 x SkyRC D100neo Dual-Channel AC/DC Universal Smart Balance Charger Core Station

1 x Heavy-Duty AC Mainline Power Cable

1 x Technical User Operational Reference Manual