BetaFPV 6-port 1s battery charger

The BetaFPV 6-Port 1S Battery Charger is a compact, high-efficiency power management station engineered specifically for micro FPV drone pilots utilizing 1S lithium power cells. Featuring an innovative dual-connector interface deployment, each independent output path is integrated with both BT2.0 and PH2.0 hardware receptors, allowing simultaneous multi-protocol battery maintenance. When coupled with a high-throughput 30W USB-C Type-C power adapter, the station leverages advanced fast-charging profiles including PD3.0 and QC3.0 to distribute up to 1.0A of continuous charging current to each independent channel. This enables a complete, simultaneous replenishment of six ultra-micro battery packs in approximately 25 minutes.

Features

Dual-Interface Connector Array: Each of the six independent charging lanes is configured with physical BT2.0 and PH2.0 ports, accommodating varied battery terminal architectures without external adapter cables.

Multi-Protocol USB-C Mainline: Integrated digital negotiation chips support standard PD3.0, QC3.0, and BC1.2 power delivery pipelines, safely accelerating input routing via intellectual voltage-step scaling.

Dedicated Independent Overdrive: Delivers a full 1.0A charging current per isolated channel when powered by a compatible 30W source, cutting standard multi-pack bench periods down significantly.

Integrated Voltage Cutoff Switch: Features a structural tactile selector toggle enabling pilots to alternate voltage limits directly to 4.35V for High-Voltage Lithium (LiHV) chemistry lines, with updated baseline batches including a structural "OFF" detent line.

Direct LED Status Matrix: Outfitted with six independent green LED state indicators providing localized visual diagnostics regarding the real-time processing loop of each single cell.

Universal Cross-Compatibility: The secondary 30W Type-C adapter acts as a standalone fast-charging source compatible with external USB-C devices, laptops, smartphone hardware, and compatible radio transmitters.

Specifications

Brand: BetaFPV

Product Variant: 6-Port 1S Charger and Power Supply Kit

Primary Hardware Input Interface: USB Type-C Terminal Port

Input Operational Voltage Corridor: 5.0V – 12.0V DC Range

Maximum Input Power Threshold: 30 W

Maximum System Input Current: 2.5 A

Peak Charging Current Parameter: 1.0 A Per Independent Port

Supported Battery Terminals: BT2.0 and PH2.0 Structural Layouts

Negotiation Protocols: PD3.0 / QC3.0 (Configured steps at 5V, 9V, 12V) / BC1.2

Target Battery Chemistry Profile: LiHV 4.35V High-Voltage Lithium Cells

Physical Footprint Dimensions: 79 mm × 46 mm × 19 mm

LED Status Diagnostics

Flashing Green Sequence: Active power connection established; no battery terminal detected on path

Solid Green Luminescence: High-amperage charging cycle currently in active progress

LED Completely Dark: Recharging lifecycle finalized (or terminal hardware line breakdown)

Notes

Hardware Constraint Policy: Each of the six charging zones houses one PH2.0 and one BT2.0 port linked to a shared circuit. Never connect two batteries into the exact same numerical port channel simultaneously. Doing so will cause severe cross-cell discharge anomalies, structural battery expansion, permanent lifespan degradation, or localized thermal fire hazards.

Power Supply Warning: Utilizing a standard, non-fast-charging power brick (such as a generic 5V/2A supply) will limit the total power allocation. Under low-wattage inputs, the station cannot distribute 1.0A per channel concurrently, which will increase the overall time required to charge multiple batteries.

Line Fault Indication: If a channel indicator LED remains entirely dark when an empty port receives an input power connection, it signals a localized circuit line fault. Discontinue use of that specific channel lane immediately.

Package

1 x BetaFPV 6-Port 1S Battery Charger Base Module

1 x High-Output 30W Type-C Fast Power Adapter

1 x Technical User Operational Reference Manual