iFlight BLITZ H7 Pro Combo Set (E80 Pro 4-in-1 ESC)

BLHeli32 Configuration

Since BLHeli32 is closed due to regulatory restrictions, to configure ESC parameters with the CNC Alum Cover, you must download "BLHeliSuite32Test" from the "Download" section on this page.

BLITZ H7 Pro Flight Controller

The BLITZ H7 Pro is a high-performance flight controller with a dual shielded case that protects it from interference and dust. The removable cover allows for easy replacement of the TF card. The powerful STM32H743 processor provides support for input voltage up to 12S and is compatible with ArduPilot, Betaflight, and INAV firmware, which opens up wide configuration possibilities.

Key Features

Mounting: 35×35 mm

GH1.25 connector: Reliable connection and ease of installation

Black box: Data recording to an SD card

Dual shielding: Protection against external influences

Expansion pads: Easy connection of additional modules

DC-DC converter: Withstands voltage up to 100V

Firmware support: Betaflight, ArduPilot, INAV

Specifications

MCU: STM32H743

Gyro: ICM42688

Barometer: DPS310

OSD: AT7456E

Input voltage: 14.8V-50.4V (4S-12S LiPo)

UART: 7 ports

Support for Smartaudio/IRC Tramp VTX

LED Controller: Yes

Dimensions: 42×42×11.3 mm

Weight: 20 g

BEC Output: 5V 3A, 12V 2.5A

Firmware

Betaflight: IFLIGHT_BLITZ_H7_PRO (BF4.4.2)

INAV: IFLIGHT_BLITZ_H7_PRO

ArduPilot: BlitzH743Pro

Connection Recommendations

UART1: VTX HD/Analog

UART2: Receiver

UART4: GPS

UART5: ESC Telemetry

8 Dshot/PWM outputs

2 I2C ports for GPS Mag

BLITZ E80 4-in-1 ESC

The BLITZ E80 is a 4-in-1 ESC using PSMN1R0-40YLD MOSFETs, which withstand 80A of continuous current and have a maximum power dissipation of 198W. The TI automotive synchronous rectifier supports voltage up to 100V. An eight-layer double-sided PCB with 4OZ copper plating ensures stable operation at high power levels. An STM32F051 processor with a 48MHz frequency and three-in-one driver IC ensure fast command processing.

Key Features

Smart layout: Recessed contact pads for better connection

Processor: G071, 48MHz

TDK MLCC Low ESR ceramic capacitors

Top-tier PSMN1R0-40YLD MOSFETs

Double-sided 8-layer PCB

Specifications

Name: BLITZ E80 4-IN-1 ESC

Input voltage: 2-8S

Maximum continuous current: 80A

Maximum burst current: 100A

Processor: G071

BEC: None

Firmware: BLHeli32

Current sensor: Yes

Telemetry: Supported

Firmware (Target): IFLIGHT_BLITZ_G2

Mounting: 35×35 mm/Ø3 mm

Dimensions: 35×42 mm

Weight: 65 g (±10 g)

Protocols: DShot150/300/600, MultiShot, OneShot, etc.

Package

1× BLITZ H7 Pro Flight Controller

1× BLITZ E80 4-IN-1 ESC (Combo1)

2× BLITZ E80 4-IN-1 ESC (Combo2)

1× 50V 470UF capacitor board

2× 50V 1000UF capacitors

1× Wiring set

1× USB adapter