GEPRC TAKER F405 BLS 65A V2 STACK

The GEPRC TAKER F405 HD V3 65A Stack is a versatile, high-performance electronics system designed for FPV drones, notable for its extended 3–8S high-voltage LiPo support on the ESC side. It combines the reliable processing of an F405 MCU with a highly efficient 65A 4-in-1 ESC, giving pilots an incredibly smooth flight experience and clean, solderless integration with digital video systems.

Features

High-performance STM32F405 main flight controller chip

Equipped with the ICM42688-P gyroscope for stable and responsive tracking

16MB onboard Blackbox memory space for telemetry logging

Built-in LC filter to ensure clean power distribution

Modernized USB Type-C interface

Direct plug-and-play port for DJI Air Unit integration

Paired with the TAKER H65_8S_BLS 65A 4IN1 ESC for efficient power management and smooth performance up to 8S

Simple and robust installation method with vibration-damping mounts ensuring stable gyro operation

Independent dual BEC with 12V@2.5A and 5V@3A outputs

GEP-F405-HD V3 Flight Controller Specifications

MCU: STM32F405

IMU: ICM42688-P (SPI)

Air Unit Connection: Direct plug-and-play port for DJI Air Unit

Blackbox: 16MB onboard Flash

Barometer: Supported

Motor Outputs: M1–M6 (supports hexacopter configurations)

USB Interface: Type-C

OSD: Betaflight OSD with AT7456E chip

BEC Output: 5V@3A, 12V@2.5A dual independent BECs

Firmware Target: GEPRCF405

Dimensions: 37.15×37.15 mm

Mounting Pattern: 30.5×30.5 mm (φ4mm holes, reducible to φ3mm with silicone damping grommets)

Input Voltage: 3-6S LiPo

UART Ports: 6

Power Filtering: Onboard LC filter

Weight: 7.3 g

TAKER H65_8S_BLS 65A 4IN1 ESC Specifications

Input Voltage: 3-8S LiPo

Current Sensor (Amperometer): Supported

Continuous Current: 65A

Burst Current: 70A (for 5 seconds)

Protocols Supported: Dshot 150/300/600

Dimensions: 42×45.7 mm (30.5×30.5 mm mounting pattern, φ4mm holes reduce to φ3mm with silicone damping rings)

Weight: 14.9 g

Firmware Target: B_X_30

Package Contents

1 x Flight Controller board

1 x 4-in-1 ESC board

1 x Capacitor

1 x DJI Air Unit adapter cable

1 x Flight controller adapter cable

1 x XT60 power cable

4 x M330 screws

4 x M325 screws

8 x Nylon nuts

8 x Silicone anti-vibration grommets

2 x SH1.0 4-pin silicone cables

1 x Camera connection cable