BetaFPV Lipo Battery Strap Kit

The BETAFPV Micro High-G Battery Strap Kit is a versatile, lightweight retention ecosystem explicitly engineered to secure micro and mini flight packs against intense centrifugal forces and sudden impacts. Featuring a high-tensile nylon construction with integrated anti-slip surface qualities, this system is optimized for high-performance Whoop, toothpick, and micro toothpick frames (such as the Beta85X). The inclusion of custom-cut adhesive rubber traction pads provides a secondary mechanical friction barrier, completely eliminating axial battery sliding and ejecting during aggressive acrobatics or hard racing crashes.FeaturesIntegrated Anti-Slip Weave: Features a high-friction nylon composite architecture that provides an immediate mechanical grip against the smooth plastic or heat-shrink surfaces of LiPo cells.Adhesive Rubber Traction Pads: Packaged with premium rubber pads designed to stick directly to your frame's battery tray, creating a dual-surface locking matrix that neutralizes battery shift.Tailored Micro Geometry: Available in narrow 10mm and standard 15mm widths to easily slide through tight micro carbon slots or plastic Whoop battery loops without component binding.Multi-Sized Micro Versatility: Offered in three specialized size profiles to support everything from ultralight 2S indoor packs to aggressive 5S outdoor configurations.SpecificationsBrand: BETAFPVModel Name: Micro High-G Anti-Slip Battery Strap KitMaterial Composition: High-Tensile Structural Nylon / Cohesive Hook-and-Loop FabricTraction Components: Non-Slip Adhesive Rubber PadsBase Fabric Color: Tactical BlackFrame Compatibility: Beta85X, Micro Whoops, Toothpick Drones, and 2-Inch to 4-Inch FPV AirframesSize & Pack Configuration OptionsSelected Kit OptionIncluded StrapsIncluded Rubber PadsTarget Battery MatchMicro 2S–4S Combo Kit3× (10mm × 115mm)3× (10mm × 150mm)6× Adhesive Pads2S – 3S LiPo (115mm)3S – 4S LiPo (150mm)Mini 4S–5S Standalone Kit2× (15mm × 200mm)N/A4S – 5S High-Capacity LiPoOperational InstructionsRubber Traction Integration: Clean your drone's battery mounting plate or Whoop plastic tray with isopropyl alcohol. Peel off the backing tape of the included rubber pads and press them firmly onto the frame surface.Strap Routing Path: Thread the tail end of the strap through the dedicated battery slots in your frame, ensuring the soft loop side faces inward toward the battery base and the hook profile faces outward.High-Tension Locking: Rest your LiPo battery squarely on the installed rubber traction pad. Wrap the strap over the center mass of the pack, loop the tail through the slot or plastic/metal buckle, and pull with firm linear tension before pressing the hook-and-loop surfaces together.Pre-Flight Clearance Check: Tuck all battery main power wires and balance leads safely inside the fastened strap structure to isolate them completely from spinning propeller arcs.NotesPropeller Clearance Warning: Because micro drones and sub-2.5-inch Whoops have extremely tight spaces between the frame and props, an unmanaged balance lead or long strap tail can easily swing into the prop path. Always ensure the strap tail is pressed flat.Optimal Tension Balance: Tighten the strap enough to eliminate all shifting, but avoid applying excessive mechanical compression that deforms or pinches the soft outer casing of your LiPo cells to prevent internal cell damage.Immediate Post-Crash Inspection: Following a hard landing or collision, check the strap tension. Field dust, loose dirt, or grass debris can contaminate the micro hook-and-loop matrix, lowering its retention capacity.PackageIf 2-4S Combo Kit is selected: 3 x 10x115mm Straps, 3 x 10x150mm Straps, 6 x Adhesive Non-Slip Rubber PadsIf 4-5S Kit is selected: 2 x 15x200mm High-Strength Battery Straps