BetaFPV HexaCharger 1S Charger

The HexaCharger 1S is a palm-sized, high-capacity power management station engineered specifically for micro FPV drone pilots utilizing 1S battery systems. Available in two distinct performance configurations—Standard (24W) and Pro (78W)—the hub features an advanced multi-protocol USB Power Delivery (PD 3.0) input framework driving six completely isolated charging lanes. Outfitted with dual-connector structural hardware receptors supporting both BT2.0 and PH2.0 interfaces, a dedicated automated storage-charge maintenance cycle, active thermal management, and a full-color TFT telemetry screen, this device delivers comprehensive field diagnostics and precise voltage regulation down to a minute variance threshold.

Features

Dual-Interface Connector Grid: Each of the six independent charging lanes integrates physical BT2.0 and PH2.0 connection paths, facilitating plug-and-play maintenance for diverse tiny-whoop battery lines without external adapter leads.

Polarity Inversion Protection: The physical molding and geometric design of the onboard port receptors are keyed to prevent reverse-polarity insertion errors, shielding internal circuits from catastrophic shorting.

Automated Storage Maintenance Protocol: Built-in bidirectional storage software commands the hub to automatically charge or discharge connected cells until they reach a stable nominal storage baseline of 3.85V, utilizing a 400mA discharge current per channel to preserve battery health.

Intellectual Load Balancer: Integrated power allocation algorithms continuously evaluate incoming wattage parameters. If the connected external adapter drops below critical load ceilings, the hub dynamically limits per-port output or scales down to sequential single-port charging to defend weak power grids.

Dynamic Thermal Protection Cutoffs: Active temperature arrays continuously monitor internal heat fields. If component temperatures cross structural thresholds, the core processor throttles current delivery or executes a total system halt until safe operating parameters are restored.

Dual-Button Operational Interface: A streamlined physical control configuration consisting of two tactile buttons allows pilots to make instantaneous field modifications to target charging currents, cutoff parameters, and active power profiles.

Specifications

Product Name: HexaCharger 1S Hub Series

Available Performance Variants: Standard Version (24W Matrix) / Pro Version (78W Overdrive)

Primary Hardware Input Interface: USB Type-C Terminal Port

Input Negotiation Protocol: PD 3.0 (Power Delivery)

Target Battery Chemistry Profiles: Standard LiPo (4.20V Cutoff) / High-Voltage LiHV (4.35V Cutoff)

Target Automated Storage Voltage: 3.85V Per Cell (With a 400mA active discharge rail per channel)

Voltage Precision Tolerance: ±0.03 V

Telemetry Interface Module: 1.3-Inch Full-Color TFT Digital Matrix Screen

Active Heat Dissipation Matrix: Onboard Aluminum Radiators paired with a 9,000 RPM Dedicated Cooling Fan

Physical Footprint Dimensions: 106 mm × 56 mm × 25.5 mm

Performance Variant Specifications

Standard Version

Maximum Input Power Matrix: 24 W

Concurrent Multi-Channel Allocation: Up to 1.0 A continuous output per channel across all 6 ports simultaneously

Physical Mass Parameter: 109 g

Pro Version

Maximum Input Power Matrix: 78 W

Concurrent Multi-Channel Allocation: Up to 3.0 A high-amperage output per channel across all 6 ports simultaneously

Physical Mass Parameter: 115 g

Power Adapter Pairing Guidelines

HexaCharger Standard Architecture: For baseline operational optimization, couple the hub with a quality USB-C PD 3.0 wall adapter or field power bank rated at a minimum output power of 30W.

HexaCharger Pro Overdrive Architecture: To unlock the complete high-amperage 3.0A multi-channel throughput ceiling, you must power the station via a premium power adapter rated at 100W or greater.

Notes

Hardware Constraint Policy: Each of the six charging zones houses one PH2.0 and one BT2.0 port linked to a shared circuit. Never connect two batteries into the exact same numerical port channel simultaneously. Doing so will cause severe cross-cell discharge anomalies, structural battery expansion, permanent lifespan degradation, or localized thermal fire hazards.

Low Input Safety Failover: When connected to an unstable or weak external power source supplying less than 5W of input potential, the hub will automatically suspend simultaneous charging and shift to an isolated sequential charging loop, managing batteries one by one from port 1 through port 6.

Package

1 x HexaCharger 1S (Standard or Pro Variant Base Module dependent on purchase)

1 x Technical User Operational Reference Manual