iFlight BLITZ E80 Pro 4-IN-1 ESC Motor Controller

The MOSFET used in the BLITZ E80 is the PSMN1R0-40YLD, which withstands a continuous current of 80A at 25°C, with a maximum power dissipation of 198W. The BEC power supply uses a synchronous automotive rectifier chip from TI that supports up to 100V.

The 1-4 layers of the PCB are made of ultra-thick 4OZ copper, ensuring stable output when working with high power. The main controller is an STM32F051 with a clock frequency of up to 48MHz, combined with an integrated three-in-one driver for high-speed operation.

Features

Optimized layout, countersunk holes on elongated solder pads for reliable PCB layer connection

MCU G071, maximum clock frequency 48MHz

Low-impedance TDK MLCC ceramic capacitors

High-quality PSMN1R0-40YLD MOSFETs

8-layer double-sided PCB

Version Updates

November 8, 2023: CNC aluminum housing version updated to a more enclosed variant

August 6, 2024: BLHeli32 is no longer officially supported for configuration due to regulatory restrictions. To configure this ESC's parameters, download "BLHeliSuite32Test" in the "Download" section on this page

Specifications

Product name: BLITZ E80 4-IN-1 ESC

Input voltage: 2-8S

Max continuous current: 80A

Max burst current: 100A

MCU: G071

BEC: None

Firmware: BLHeli32

Current sensor: Yes

Telemetry: Supported

Firmware target:

IFLIGHT_BLITZ_G2 (with CNC aluminum housing)

IFLIGHT_BLITZ_G3 31.91 (without CNC aluminum housing)

Mounting holes: 35x35mm/Φ3mm

Dimensions: 35x42mm

Weight: 65g (±10)

Protocols: Supports DShot150/300/600, MultiShot, OneShot, etc.

Package

1 x BLITZ E80 4-IN-1 Pro ESC

1 x Wiring harness set

Note

If you are using the ESC for Taurus X8 V3, Protek60 Pro, X413, or X415, select "Without CNC".