Quadcopter GEPRC Cinelog 35 V2 ELRS2.4G

Combining the experience and development of the GEPRC team in all aspects, the CineLog35 V2 has finally been released to the market with improved performance.

The CineLog35 V2 version integrates the O3 video transmitter. The main carbon plate and injection-molded propeller guard of this version have been reinforced by adding 7075 aluminum columns to strengthen the structure.

The battery mounting method utilizes a strap combined with fixed 7075 aluminum parts. The XT60E1-M power plug is integrated into the carbon plate for convenient use. The O3 Air Unit protective frame includes memory card and USB port access for easy data reading.

Equipped with the F722-45A AIO flight controller and new SPEEDX2 2105.5 motors, this setup delivers higher power with an aggressive propulsion system and faster response.

This is a 3.5-inch HD FPV cinematic drone that combines cinematic shooting, freestyle, leisure, and safety to meet the pilot's requirements for flying and filming in various indoor and outdoor scenarios.

Changelog:

May 8, 2023: The CineLog35 V2 motor has been updated from SPEEDX2 2105.5-2150KV (6S) to SPEEDX2 2105.5-2650KV (6S).

September 4, 2023: The CineLog35 V2 GPS module has been updated from the GEP-M8U GPS to the GEP-M10 GPS.

CineLog35 V2 CLI Dump: https://geprc.com/downloads/cinelog35-v2/

Key Features:

New appearance design featuring a reinforced carbon plate with a hollowed-out structure, an injection-molded guard, and noise-reduction design to ensure safe and quiet flights.

Utilizes the high-performance GEP-F722-45A AIO V2 flight controller.

Propeller guard provides easy access to the O3 Air Unit memory card slot and USB ports for convenient data reading.

The O3 camera is mounted on an independent suspended vibration-dampening gimbal, solving camera IMU resonance issues and achieving optimal anti-shake performance.

SPEEDX2 2105.5 motors paired with HQ DT90 propellers ensure stable power output and smooth flight characteristics.

Power cable with an integrated XT60E1-M plug on the carbon plate offers convenient application.

Battery installation utilizing a strap with fixed 7075 aluminum parts ensures robust and stable securing.

Carefully tuned 3.5-inch cinematic HD FPV drone delivering a flexible and precise flight feel.

Technical Specifications:

Model: CineLog35 V2 HD O3

Frame: GEP-CL35 V2

Wheelbase: 142mm

Gimbal plate: 2.0mm

Top plate: 3.5mm

Bottom plate: 1.5mm

Flight controller system: GEP-F722-45A AIO V2

MCU: STM32F722RET6

Gyroscope: ICM 42688-P

OSD: Betaflight OSD with AT7456E chip

ESC: 8-bit, 45A

VTX: O3 Air Unit

Camera: O3

Antenna: 5.8G and 2.4G

Motors: SPEEDX2 2105.5-2650KV (6S)

Propellers: HQProp D-T90MM

CineLog35 V2 HD O3 TBS NanoRX weight: 285.8g

Receiver options: PNP / GEPRC ELRS 2.4G / TBS Nano RX

Recommended battery: LiPo 1050mAh–1300mAh / GEPRC Storm 6S 1300mAh 120C

Flight time: 5 minutes to 8 minutes 30 seconds

Package Includes:

1 × CineLog35 V2 HD O3

2 × HQProp D-T90MM Propellers (Pairs)

2 × M20250mm Battery Straps

2 × Silicone Battery Pads

1 × Spare Screws Set

1 × 1.5mm L-shaped Screwdriver

1 × 2mm L-shaped Screwdriver

1 × 3mm L-shaped Screwdriver

1 × M5 Wrench

1 × Plastic Tweezers

1 × Antenna Mounting Tubes (Pair)

1 × Keychain

1 × GP Camera Mounting Base

1 × Naked GP Camera Mounting Base

1 × Antenna Mount Base

Spare Screws Set Includes:

2 × M218 Button Head Screws

2 × M25.5 Round Head Screws with Pad

1 × M212 Round Head Screw

2 × M2 Rivet Nuts

4 × M28 Round Head Screws

4 × M27 Round Head Screws

4 × M26 Round Head Screws

2 × M2.56 Round Head Screws

2 × M1.68 Hex Screws

1 × M5 Flange Nut

2 × M21.9-OD4.9 Brass Press Rivet Nuts

2 × M2 Iron Nuts

2 × Camera Damping Rubbers