GEPRC Cinelog30 V3 WTFPV Quadcopter

The CineLog30 V3 is equipped with the O4 Air Unit Pro VTX processing chip, delivering outstanding image quality with precise color reproduction and fine details thanks to its advanced processor.

The frame is reinforced with aluminum for additional durability, and the electronic bay features a wrap-around design for superior protection of internal components. Dustproof plugs shield the data transmission ports, while a canopy guards the camera from impacts. The rear PDB facilitates clean wiring and efficient layout configuration.

Driven by the 32-bit TAKER F722 45A AIO, 1404 3850KV motors, HQProp DT76mm×3 propellers, and a LiHV 4S 720mAh battery, the CineLog30 V3 is capable of up to 8 minutes 10 seconds of flight. Thanks to the advanced image processing capabilities of the O4 system, it ensures smooth, high-quality cinematic capturing.

Key Features

Equipped with the latest O4 Air Unit Pro, providing crisp details, high resolution, and excellent performance in low-light environments.

Advanced frame with a wrap-around structure for enhanced protection of electronic components.

Aluminum-reinforced front panel and protective frame layout for additional durability.

Sleek front cover to shield the O4 Air Unit Pro lens from impacts.

Dustproof plugs for the data transmission ports to prevent debris ingress during takeoff and landing.

Custom PDB integrating the receiver, buzzer, LED BEC, TVS diode, and anti-spark functionalities.

CineLog series gimbal mount design for stable, smooth footage from the O4 Air Unit Pro.

Meticulously tuned PID settings from the GEPRC team for ultra-smooth, responsive flight control.

Technical Specifications

Model: CineLog30 V3 WTFPV Quadcopter

Frame model: GEP-CL30 V3

Carbon plate thickness: 2.5mm

Wheelbase: 128mm

Flight controller system: TAKER F722 45A 32-bit AIO

MCU: STM32F722RET6

Gyroscope: ICM 42688-P

FC firmware: GEPRC_F722_AIO

Flash memory: 16MB

ESC: 32-bit, 45A

Motors: SPEEDX2 1404 3850KV

Propellers: HQProp DT76mm×3 V2

Power connector: XT30

VTX: None

Camera: None

Antenna: None

Receiver options: PNP (integrated VTX digital receiver) / ELRS 2.4G / TBS Nano RX

Weight (TBS Nano RX version): 148g ± 2g

Recommended battery: LiHV 4S 660mAh–720mAh

Flight time: Up to 8 minutes 10 seconds (tested at slow cruising speeds; actual time may vary depending on flying style)

Package Includes

1 × CineLog30 V3 Quadcopter

1 × Protective Frame (Translucent Black)

2 × HQProp DT76mm×3 V2 Propellers (Pairs)

1 × 15150mm Battery Strap

1 × 1.5mm L-shaped Screwdriver

1 × Grey Canopy

1 × Black Canopy

1 × Spare Screws Set

1 × Anti-slip Battery Pad

1 × Damping Ball Puncher

1 × Frequency Bind Pin

Spare Screws Set Includes

1 × M2 Rivet Nut

4 × M24.5 Button Head Hex Screws

4 × M26 Button Head Hex Screws

4 × M24 Button Head Hex Screws

1 × M2*12 Countersunk Screw

2 × Damping Balls