GEPRC Vapor-D5 HD O4 Pro FPV Drone

The GEPRC team has redesigned the Vapor series for optimal compatibility with the DJI O4 Air Unit Pro VTX.

New aluminum lens components and damping silicone reduce vibrations, while new sharp side panels give the camera a bold, mechanics-inspired look.The larger CMOS sensor of the DJI O4 Air Unit Pro increases image detail and sensitivity, and GEPRC-supported PID settings ensure a smooth and exciting flight.

Available in two models, Wide X and DC, to meet different flight needs.

Features

DJI O4 Air Unit Pro is equipped with a powerful CMOS sensor for improved image clarity and increased light sensitivity.

CNC aluminum lens housing for a durable, bold design.

GEPRC SPEEDX2 E-series motors for smooth and powerful performance.

Front edge design provides extra lens protection for confident flying.

Wide 5mm carbon fiber arms for greater strength and sleek design.

Technical specifications

Model: Vapor-D5 O4 Pro

Frame: GEP-Vapor-D5 O4 Pro

Wheelbase: 230 mm

Top plate: 2.0 mm

Middle plate: 2.0 mm

Bottom plate: 2.5 mm

Arm thickness: 5.0 mm

FC: GEP-F722-HD v2

MCU: STM32F722

Gyro: ICM42688-P (SPI)

Barometer: YES

OSD: Betaflight OSD w/AT7456E

ESC: TAKER H60_BLS 60A 4IN1 ESC

VTX: DJI O4 Air Unit Pro

Camera: O4 Pro Camera

Antenna: Original O4 Pro antenna

Connector: XT60

Optional GPS: GEP-M10 GPS

5-inch motor: GEPRC SPEEDX2 2207E 1960 KV

5-inch propeller: GEMFAN 5136

Vapor-D5 O4 Pro PNP version Weight: 428 g ± 5 g

Receiver: PNP/GEPRC ELRS24/TBS Nano RX

Recommended battery: 6S LiPo 1300mAh – 1800mAh

Flight time: 14-19 min

Kit

1 x Vapor-D5 O4 Pro

2 x GEMFAN 5136

2 x Battery anti-slip pads

1 x Spare screw set

1 x Vapor side panel

2 x M20250mm battery straps

1 x 1.5 mm L-shaped screwdriver

1 x 2.0 mm L-shaped screwdriver

1 x GoPro mount

Spare screws include:

6 x M310mm round head screws

6 x M38mm round head screws

2 x M36mm flat head screws

1 x M5*28mm thin head screw

1 x M5 flange nut

4 x M3 rivet nuts