Video transmitter GEPRC MATEN 5.8G 3W VTX PRO

The GEPRC MATEN 5.8G 3W VTX PRO is a high-performance analog video transmitter engineered for specialized long-range FPV operations within the standard 5.8GHz spectrum. Utilizing a robust dual-core structural architecture, it delivers 5 adjustable power stages up to a massive 3000mW output ceiling, guaranteeing exceptional signal propagation, dense obstacle penetration, and maximum link reliability. Housed inside a high-strength CNC-machined aluminum alloy casing paired with an integrated active micro turbo fan, its unique design maximizes thermal dissipation while providing professional-grade impact resistance. Outfitted with a wide 7V to 36V voltage tolerance and active temperature protection, this VTX features an integrated internal microphone, an expansive 80-channel matrix, and supports the standardized IRC Tramp protocol for effortless parameter tuning.

Features

High-Output Dual-Core Design: Outfitted with 5 adjustable power steps capable of stepping from stealth PIT mode up to an extreme 3000mW (3W) maximum output, making it ideal for specialized deep-range aircraft tracking.

Active Turbo-Fan Cooling: Combines a full structural CNC aluminum heat dissipation shield with an active internal micro turbo fan to maximize airflow and prevent thermal locking during high-power deployments.

IRC Tramp Telemetry Interface: Seamlessly integrates with standard IRC Tramp protocol fields, allowing pilots to modify video channels, bands, and power steps directly through the Betaflight OSD.

High-Acoustic Onboard Microphone: Features a built-in miniature microphone transmitting real-time motor and environmental audio telemetry straight to the pilot's audio receiver.

Expansive Frequency Spectrum: Operates across a massive 80-channel matrix, providing ultimate frequency flexibility to easily bypass ambient signal overcrowding and multi-pilot interference.

Intelligent Over-Heat Safety: Built-in temperature control monitoring actively safeguards internal processing circuits by throttling RF output stages if thermal safety thresholds are crossed to prevent high-temperature damage.

Single-Button Interface Logic: Features a simplified physical control button paired with 3 bright LED diagnostic indicators for instantaneous, tool-free field adjustments.

Dual Mounting Compatibility: Integrated structural footprint natively accommodates both 20x20mm (M2) and 30.5x30.5mm (M2) mounting layout configurations.

Dedicated Camera Power Rail: Features a clean, regulated 5V output line designed specifically to supply clean power to onboard camera modules or small auxiliary cooling fans.

Specifications

Brand: GEPRC

Model Name: MATEN 5.8G 3W VTX PRO

RF Carrier Frequency: 5.8 GHz Spectrum Core

Available Channel Matrix: 80 Selectable Channels

RF Output Power Platform: PIT / 25 mW / 200 mW / 600 mW / 1600 mW / 3000 mW (Adjustable)

Telemetry Integration Bus: IRC Tramp Protocol

Primary Operating Input Voltage: 7.0 V – 36.0 V DC (Supports direct 2S – 8S LiPo mainlines)

Regulated Auxiliary Output: 5 V at 600 mA Maximum

Acoustic Monitoring Hardware: Built-in High-Quality Microphone

Analog Signal Encoding Format: PAL / NTSC Compatible

Antenna Interface Connector: Low-Loss MMCX Mechanical Base

Hardware Data Interconnect Bus: SH1.0 6-Pin Interface Port

Mechanical Mounting Patterns: 20.0 mm × 20.0 mm (M2) / 30.5 mm × 30.5 mm (M2) Dual Layout

Physical Footprint Dimensions: 36.3 mm × 36.3 mm × 15.1 mm

Weight Parameter: 21.1 g (VTX Module only)

Notes

Before use install the antenna. Running a high-power VTX without an antenna will cause instant, catastrophic damage to the RF amplifier stage.

Fly with constant airflow and in a well-ventilated environment to prevent overheating. Install an additional cooling fan if operating in confined spaces.

The 5V output is designed strictly for powering the FPV camera or small auxiliary fans. Never connect the main power supply or battery mainline to this 5V output line, as it will destroy the VTX circuitry.

Package

1 x GEPRC MATEN 5.8G 3W VTX PRO Module

1 x MMCX Right-Angle Copper Tubular Antenna Assembly

1 x MMCX to SMA RF Extension Adapter Cable

1 x SH1.0 6-Pin Hardware Wiring Harness

6 x M25 Hex Structural Screws

6 x M212 Hex Structural Screws