GEPRC MOZ7 Long Range FPV Quadcopter

The Starship series MOZ7 model is officially launched by GEPRC. Continuing the traditional design concept, it features personalized protective side plates. The details are enhanced with various mechanical textures, giving the drone a nautical and industrial look.

MOZ7 supports a maximum stack size of 30.5mm × 30.5mm and is compatible with various VTX and custom cooling systems. An innovative camera mounting method, with alternative left and right installation of aluminum camera parts, allows switching between 19mm and 20mm sizes. The camera mount is reinforced with a carbon plate to make the mounting force more uniform and prevent warping and deformation.

It uses the SPAN F722-BT-HD V2 stack and supports wireless Bluetooth parameter configuration. The 2809 motors with HQ7.53.73 propellers are powerful. At the same time, it is equipped with GEP-M10-DQ GPS to protect long-range flights. The front receiver antenna prevents the fuselage from blocking the receiver signal during aerial maneuvers.

Use the GEP-VTC6-6000mAh battery to fly for 30 minutes, and with a GoPro 10, to fly for 20 minutes. Choose the DJI O3 version for camera recording, which supports up to 4K 120 FPS to meet your daily shooting needs.

The new MOZ7 series will help you cover distance and obtain extraordinary images.

Specifications:

Model: MOZ7

Frame: GEP-MOZ7

Dimensions: 280mm × 310mm

Wheelbase: 320mm

Top plate: 3.0mm

Bottom plate: 3.0mm

Arm plate: 6.0mm

Splint plate: 3.0mm

Camera mount: 2.0mm

VTX cover: 1.5mm

FC: SPAN F722-HD-BT V2

MCU: STM32F722

Gyro: 42688-P (SPI)

VTX: GEPRC RAD 5.8G&1.6W

ESC: GEP-BLheli32-50A

Propeller: HQ7.53.73

Antenna: Momoda 5.8G RP-SMA RHCP 120MM

Motor: 2809-1280KV (6S version)

GPS: GEP-M10

Camera: Caddx Ratel2

Weight: 675.5g

Receiver: PNP, TBS NanoRX, ELRS 2.4G, ELRS 915M

Recommended battery: VTC6 6S 6000mAh / LiPo 6S 3300mAh

Package:

1 x MOZ7 Analog drone

4 x HQ 7.5×3.5×3 propellers (4 pairs)

2 x Battery straps M20×250mm

2 x Battery straps M20×300mm

2 x Silicone battery pads

1 x Screw set

1 x 3D-printed parts

1 x L-shaped hex key (1.5mm)

1 x L-shaped hex key (2mm)

1 x L-shaped hex key (3mm)

1 x M5 wrench