GEPRC WooPower W63 1S Charger

The WooPower W63 is a premium, high-capacity six-channel power management station engineered specifically for micro FPV drone pilots utilizing 1S battery systems. Featuring a highly versatile dual-input infrastructure that accepts both standard DC XT60 power mainlines and high-throughput USB Power Delivery (PD 3.0) lines, this hub delivers six completely isolated charging lanes. Each channel group integrates physical PH2.0 and BT2.0 hardware receptors (fully cross-compatible with A30 terminals) supporting independent charging, active discharging, and dedicated storage maintenance cycles. Guided by a bright 1.54-inch IPS LCD telemetry screen and guarded by an aggressive active cooling matrix alongside a five-tier safety cutoff framework, the station provides an exceptional 78W output ceiling to service massive ultra-micro battery fleets simultaneously.

Features

Isolated Six-Channel Multi-Tasking: Configured with six completely independent output lanes, allowing pilots to concurrently charge, discharge, or storage-condition separate batteries without cross-channel current interference.

High-Amperage Overdrive Core: All six ports support simultaneous high-speed charging up to 3.0A per channel, shifting battery turnaround times down significantly to maximize active flight sessions.

Dedicated Storage Maintenance: Integrated bidirectional software allows individual lanes to discharge cells at a continuous 0.5A rate, taking the hassle out of preparing micro packs for long-term storage.

Dual-Protocol Input Architecture: Offers complete bench and field flexibility by accepting wide-range 7-26V DC inputs via a native XT60 terminal or smart USB-C Power Delivery 3.0 pipelines.

Comprehensive Terminal Receptors: Natively houses both PH2.0 and BT2.0 interface ports on each channel lane, allowing direct plug-and-play operation with standard tiny-whoop batteries and A30 configurations without adapter leads.

Vibrant IPS Telemetry Panel: Outfitted with a 1.54-inch IPS LCD screen (240×240 resolution) delivering high-contrast, wide-angle visual tracking of real-time cell voltages, continuous currents, and isolated port processing states.

Heavy-Duty Thermal Management: Combines a large internal aluminum heatsink radiator with an intelligent active cooling fan to ensure rapid heat dissipation and prolong component lifecycles.

Five-Tier Safety Guard Infrastructure: Hardened onboard processor monitoring deploys instantaneous automated cutoffs to protect against extreme temperatures, cycle overtimes, capacity overages, short-circuits, and input anomalies.

Specifications

Brand: WooPower

Model Name: W63 (First Generation)

Primary Operational Modes: Charge / Discharge / Storage Maintenance

Target Battery Chemistry Profiles: 1S LiPo (4.20V) / 1S LiHV (4.35V) / 1S LiFe (3.60V)

Concurrent Output Channels: 6 Completely Independent Isolated Paths

Primary Input Interface Options: XT60 Male Terminal / USB Type-C Receptacle

Input Operational Voltage Corridor: DC 7.0V – 26.0V Range

Required Minimum Input Power: 100 W (To sustain maximum simultaneous multi-channel loads)

Maximum System Power Output Capacity: 78 W Combined Total Throughput

Peak Charging Current Parameter: 3.0 A Per Independent Channel (3.0A × 6 Ports)

Peak Active Discharge Current Parameter: 0.5 A Per Independent Channel (0.5A × 6 Ports)

Integrated Screen Module: 1.54-Inch IPS LCD Matrix Panel (240 × 240 Pixel Resolution)

Supported Hardware Connector Footprints: PH2.0 and BT2.0 (Natively compatible with A30)

Operational Temperature Window: 0°C – 75°C

Physical Structural Mass: 160.0 g

Physical Footprint Dimensions: 125 mm × 61 mm × 28 mm

Operational Safety Guidelines

Multi-Source Input Restriction: Never bridge external power sources to the input side simultaneously. Do not connect the XT60 mainline and the Type-C USB line to power supplies at the same time, as this will breach circuit insulation barriers and cause terminal mainboard failure.

Hardware Constraint Policy: Each of the six charging zones houses one PH2.0 and one BT2.0 port linked to a shared circuit. Never connect two batteries into the exact same numerical port channel simultaneously for charging or discharging. Doing so will cause severe cross-cell discharge anomalies, structural battery expansion, permanent lifespan degradation, or localized thermal fire hazards.

Type-C Power Sequencing: If utilizing a high-throughput USB Type-C power supply, avoid connecting the cable immediately after a system reset. If inserted too rapidly, the internal negotiation chips may fail to execute proper handshakes. Always wait approximately 8 seconds before re-inserting the Type-C line to ensure an optimal boot sequence.

Deployment Surface Rules: Always operate the station on a flat, solid, highly insulated, and completely non-flammable surface. Never run high-amperage cycles while the unit rests on vehicle seats, carpets, rugs, cardboard boxes, or cloth blankets. Keep all liquid containers and loose metal particles far away from input ports and cooling vents to eliminate the risk of high-voltage shorting.

Package

1 x WooPower W63 6-Channel 1S Multi-Function Smart Charger Base Module

1 x Technical User Operational Reference Manual