Mavic 2 PGYTECH Propeller Guards

The PGYTECH P-HA-053 is a premium, high-durability propeller holder and blade protection system engineered explicitly for the DJI Mavic 2 series enterprise and consumer drones. The primary objective of this structural accessory is to securely lock and shield the quadcopter's delicate folding propeller blades against shifting, bending, or fracturing during transit and storage. Constructed from impact-resistant ABS polymer, its custom-tailored contoured geometry seamlessly conforms to the drone's folded arm profile, creating an incredibly small mechanical footprint while shielding adjacent gear inside field transport packs.

Features

Mavic 2 Specific Contour Tailoring: Injection-molded to match the precise aerodynamic geometries and folded profile configurations of the DJI Mavic 2 Pro and Zoom airframes.

Streamlined Snap-On Interlocking: Engineered around a simplified, quick-release mechanical latching design that facilitates tool-free integration and rapid detachment within seconds.

Advanced Space-Saving Foldability: Employs an innovative collapsible structural layout that shrinks down when detached, maximizing space inside tactical pilot gear bags or specialized hard cases.

High-Impact ABS Shield Matrix: Manufactured entirely from heavy-duty, industrial-grade ABS plastic to deliver rugged puncture defiance, scratch prevention, and robust defense against external compression forces.

Minimalist Ultra-Light Footprint: Adds a negligible 88 grams of operational weight to storage setups, maintaining a lightweight profile while providing excellent physical reinforcement.

Specifications

Brand: PGYTECH

Model Name: Propeller Holder Matrix

Product Code Reference: P-HA-053 (Alternatively noted as P-HA-05 Series)

Target Airframe Compatibility: DJI Mavic 2 Series (Pro / Zoom Ecosystems)

Primary Material Composition: Industrial Impact-Resistant ABS Plastic

Physical Structural Net Mass: 88.0 g

Gross Combined Weight (In Factory Packing): 220.0 g (Approximately 0.49 lbs)

Physical Footprint Dimensions: 210 mm × 190 mm × 80 mm (8.27" × 7.48" × 3.15")

Operational Instructions

Airframe Prep Alignment: Power down the DJI Mavic 2 quadcopter entirely. Follow standard operating checklists to carefully fold both the front and rear structural motor arms neatly against the main chassis flanks.

Propeller Blade Consolidation: Gather the loose, folding upper and lower propeller blade segments, smoothing them flat along the upper cowl and bottom underbelly surfaces respectively to ensure they lie completely flush.

Guard Core Orientation: Align the contoured brackets of the PGYTECH holder module with the matching curves of the drone's upper shell or lower battery carriage array.

Interlocking Lock Execution: Guide the brace around the consolidated blade paths. Gently press the quick-release lock down until a firm tactical click indicates that the blades are firmly immobilized and secure.

Pack Disconnection Routine: To remove the brace prior to flight operations, release the structural snap-latch mechanism, lift the guard away from the airframe, fold the guard modules into their compact storage state, and proceed with standard pre-flight inspections.

Notes

Strict Airframe Line Constraints: The P-HA-053 shield architecture is uniquely contoured for the structural framework of the DJI Mavic 2 platform. It will not safely accommodate alternative drone variants such as the Mavic Pro, Mavic 3 Series, Air series, or Mini lines due to critical variations in arm layout, motor heights, and blade specifications.

Pre-Flight Removal Directive: Always ensure this travel protection assembly is completely removed from the airframe prior to executing any system startup or battery initializations. Activating the drone's brushless motors while the propeller holders are interlocked will cause severe electronic speed controller overload, immediate gear stripping, or motor burnout.

Stress-Free Blade Seating Check: When snapping the brackets into place, verify that the flexible blade tips are resting naturally within their designated guide channels without experiencing forced twisting or structural crimping. Storing propellers under sustained lateral stress can induce permanent structural warping, which degrades aerodynamics and risks severe in-flight oscillations.

Package

1 x PGYTECH Mavic 2 Series Folding Propeller Storage Holder & Guard Module

1 x Factory Technical Reference & Installation Sheet