ISDT P10 10A 250W Universal Duo Charger Without Power Supply

The ISDT P10 is a high-capacity, dual-channel DC smart balance charger engineered to provide flexible power management for a comprehensive matrix of radio-controlled (RC) and FPV drone flight batteries. Featuring an advanced dual-topology processing engine, this pocket-sized powerhouse operates seamlessly across two completely isolated charging circuits in asynchronous mode, or links them together in synchronous parallel mode to maximize output tracking. Guided by a high-contrast IPS LCD telemetry screen and backed by an active thermal matrix, it integrates a regulated constant current/constant voltage (CC/CV) digital power supply framework and a dedicated safety-destruction protocol for end-of-life packs.

Features

Isolated Dual-Channel Engine: Configured with two completely independent output lanes, allowing pilots to concurrently charge separate batteries at varying states of charge or different cell configurations without cross-channel current interference.

Synchronous Port Parallel Parallelism: Combines both output channels into a single, high-throughput charging pipeline, optimizing current velocities to deliver rapid replenishment for large multi-cell flight packs.

High-Contrast IPS Telemetry Display: Integrated heavy-duty IPS LCD screen provides wide-angle visual readouts of real-time cell voltages, operating current curves, and internal resistance metrics with exceptional outdoor readability.

Regulated CC/CV Digital Power Supply: Features an adjustable output subroutine, allowing the device to function as a variable benchtop power supply delivering regulated constant current and constant voltage parameters to external peripheral gear.

Automated Battery Disposal Protocol: Includes a specialized discharge matrix safely engineered to deplete compromised, bloated, or end-of-life lithium cells down to absolute zero volts, permanently neutralizing them for safe recycling.

Active Cross-Flow Cooling Layout: Outfitted with a high-RPM automated internal cooling fan paired with structured internal heatsinks to rapidly dissipate localized heat and preserve system efficiency during maximum current execution cycles.

Specifications

Brand: ISDT

Model Name: P10 (Dual-Channel Universal Smart Balance Charger Matrix)

Primary Input Power Interface: DC Terminal Port (XT60 Footprint)

Input Operating Voltage Corridor: DC 10.0V – 30.0V Range

Concurrent Charging Output Paths: 2 Independent Isolated Channels (Asynchronous / Synchronous Parallel)

Primary Hardware Output Interface: Dual Native XT60 Female Receptors

Maximum Combined Output Power Capacity: 400 W

Maximum Single Channel Output Power (Asynchronous): 250 W Per Port

Selectable Charging Current Range: 0.2 A – 10.0 A

Maximum Internal Discharge Power Capacity: 0 W (Requires external load or parallel loop)

Active Cell Balancing Current Pipeline: 500 mA Per Cell

Integrated Screen Module: High-Contrast IPS LCD Graphic Matrix Panel

Active Thermal Management: Intelligent Active Internal Cooling Fan Matrix

Physical Structural Mass: 250.0 g

Physical Footprint Dimensions: 90.5 mm × 90.5 mm × 47 mm

Battery Chemistry Compatibility Matrix

Lithium Chemistry Standard (LiPo / LiHV / LiFe / LiIon): 1S – 6S Multicell Balanced Series (3.7V – 22.2V Nominal Corridor)

Nickel Chemistry Standard (NiMH / NiCd): 1 – 16 Cell Series Configurations (1.5V – 24.0V Operational Array)

Lead-Acid Utility Chemistries (Pb / Gel): 2.0V – 20.0V Systems

Operational Structural Modes

Asynchronous Dual-Port Mode: Connect separate battery lines into the isolated XT60 and balance ports on Channels 1 and 2 independently. This layout yields up to 250W per channel, running separate charging parameters concurrently.

Synchronous Parallel Overdrive: Links the power processing matrices of both ports in the system firmware to output maximum combined amperage down a bridged line, unlocking higher current throughput for heavy-duty series packs.

Notes

External Power Supply Mandatory Requirement: The ISDT P10 is a standalone DC-input charging station and does not integrate an AC wall transformer. To operate the unit on a bench or in the field, you must couple it with an external DC power source, such as a high-capacity AC-to-DC bench power supply brick or a heavy-duty field battery (such as a large 4S–6S LiPo pack or automotive battery) supplying between 10V and 30V via an XT60 connector.

Balance Lead Mandatory Policy: When charging any multi-cell lithium pack (2S through 6S), you must connect both the primary high-current XT60 lead and the corresponding white JST-XH balance connector board simultaneously. Attempting to charge multi-cell series lines without individual channel balance telemetry bypasses critical safety overrides and can cause severe cell over-voltage, localized battery expansion, or thermal hazards.

Disposal Mode Warning: The specialized battery scrap routine is explicitly engineered to permanently destroy the chemistry of the connected battery to make it safe for disposal. Never initiate this mode on a functional flight pack that you intend to reuse, as it will deliberately draw cell potentials down to zero, causing unrecoverable chemical death.

Package

1 x ISDT P10 400W Dual-Channel DC Smart Balance Charger Core Module

1 x Technical User Operational Reference Manual