GEPRC TinyGO FPV Whoop RTF 4K Quadcopter

The TinyGO is an RTF kit designed for indoor flight.The kit includes FPV goggles with 800x480 resolution and the latest TinyRadio ELRS 2.4G remote control.It supports 8 channels and is specifically designed for indoor use and beginners.The remote control provides good handling, is lightweight, and easy to carry.A plus is that you do not need to carry heavy equipment.With our custom GEPRC Fly Bag, it is very convenient to head out to a field, travel, and fly indoors.

TinyGO can use its own charger.The charger uses a Type-C interface.You can also use a power bank for charging.Using it is convenient and fast.

TinyGO can fly for more than 6 minutes (depending on flight habits).Stable electronic equipment and an extremely strong and durable frame material make the FPV very steady and crash-resistant.There is EVA foam protection around the frame, which is more elastic and resistant to damage and deformation.

TinyGO is carefully assembled by the GEPRC team and has excellent performance.You can begin a brand new journey and enter the FPV world; TinyGO will be the best choice for your first FPV drone.

It looked like the start of an amazing flight.Literally.

Features

TinyGO is very suitable for indoor flight.Flight time is over 6 minutes.

Uses the TAKER F411 8Bit 12A FC system, reliable and stable.

No propellers in view, interference-resistant VTX, NO Jello video recording, stable flight image.

Newly designed TinyRadio ELRS 2.4G remote control is specifically designed for beginners and indoor flight.

High-quality FPV goggles, high 800480 resolution, sensitive 5.8G receiver.

Ready-to-fly kit, including GEPRC Fashion Fly bag, portable and lightweight.

Two versions available: the regular version is suitable for daily practice, the 4K version can record 4K 60fps video.

TinyGo 4K Specifications

Camera: Loris 4K

Image Sensor: 1/2.7 inch CMOS sensor

Horizontal: 800TVL

TV System: Switchable NTSC/PAL

Video Resolution: 1080P@60fps/1080P@90fps/2.7K/60fps 4K/30fps 4K/60fps [REAL 3.5K/60fps]

Input Power: 4.5-20V DC

FOV: 165°

Recording FOV: 170°

Mini Illumination: 0.01 lux

Lens: 1.8mm lens

Working Current: 380mA@5V/160mA@12V (low consumption)

OSD: Yes (supports voltage display)

Video Files: MOV

Audio: Supported

Electronic Shutter: PAL: 1/50-100,000 NTSC: 1/60-100,100

Video Output: CVBS

Configuration

Name: TinyGO

Brand: GEPRC

Frame: GEP-TG16

Wheelbase: 79 mm

FC: TAKER F411 8Bit 12A

MCU: STM32F411

IMU: 42688-P

Black Box: 16Mb

OSD: BetaFlight OSD with AT7456E chip

ESC: 8Bit 12A

VTX: RAD Whoop 5.8G, 25-400mW VTX

Camera: Runcam Nano2/Caddx Loris 4K 60fps

Propeller: GEMFAN 16364 (4 pairs)

Motors: GR1102 10000Kv

Receiver: Built-in ELRS SPI receiver

TinyGO 4K Weight: 54.8 grams

Remote Control

TinyRadio ELRS 2.4G Remote Control

Radio Frequency: 2.4 GHz

Range: 1000+ meters

Channel: 8

Transmitting Power: <500mW

Antenna Interface: SMA

Low Voltage Alarm: <6.6V

Batteries: 2x 18650 batteries (not included)

FPV Goggles

Resolution: 800480 pixels

Screen Size: 4.3 inches

Total Size: 155mmx144mmx113mm

Built-in Battery: 3.7V/2000mAh

Working Time: 2.5 hours

Weight: 314.6 grams

FPV Batteries

Capacity: 530mAh

Voltage: 4.35V 1S1P

Discharge Rate: 90C

Size: 61mm x 16.7mm x 7mm

Weight: 12.7 grams

Interface: PH2.0

Charger

Input Power: 5V (USB and Type-C)

Full Charged Voltage: 4.35V

Output Current: 500mAh

Charging: Can charge 2pcs 1s HV Lipo 4.35V HP2.0/GNB27 batteries simultaneously

Kit

1x TinyGO

1x TinyRadio ELRS 2.4G transmitter

1x GEPRC FPV RG1 goggles

1x GEPRC 1S LiHV 4.35V charger

4x GEPRC LiHV 4.35V, 90C batteries

1x Battery strap

4x Gemfan 16364 props (pairs)

1x GEPRC Fly bag

1x Screwdriver